Featured henry issues recall on H015 single shot rifles

Discussion in 'General Rifle Discussion' started by Nmwabbit, Aug 1, 2020.

Tags:
  1. Nmwabbit

    Nmwabbit Well-Known Member

    1,021
    537
    113
    FYI - see their website like i did
     
  2. schnuffleupagus

    schnuffleupagus Well-Known Member

    2,147
    2,482
    113
    Last edited: Aug 1, 2020
    locutus, alsaqr and austin92 like this.

  3. Nmwabbit

    Nmwabbit Well-Known Member

    1,021
    537
    113
    glad you were able to fill the void with all the modesty you could muster...

    thanks Aloysius

    cheers
     
  4. Sniper03

    Sniper03 Supporting Member Supporter

    10,947
    8,311
    113
    One Recall in 25 years! Other manufacturers should follow this!
    Henry is a find company with fantastic product quality and obviously good customer service.
    In closing any company no matter what the product can have a snafue! It is how they handle it! And seems due to their testing the issue was found! And no one was hurt!:)

    03
     
  5. kansastom

    kansastom New Member

    1
    2
    3
    I would have to agree with that. I can’t think of Any manufacturing business that hasn’t had in issue in 25 years. Most try to see how far they can delay doing Something about it.
     
    Rifling82 and schnuffleupagus like this.
  6. Rex in OTZ

    Rex in OTZ Well-Known Member

    4,850
    2,372
    113
    So these single shots dont have a transfer bar safety?
    I noticed the same thing with the heritage rough rider revolver, the halfcock is not a true captive half cock, its a half cock that will drop the hammer if pulled.

    Sounds like the Henry would go off if the hammer is bumped as well?
    Some the classic hammer 22's had a hard halfcock that at half cock you couldnt pull the trigger on the Ithica 49 and the Winchester 9422.
    So Henry going with a hard/captive half cock?