Firearms Talk banner

help!!!!

757 Views 5 Replies 2 Participants Last post by  potentialglock
I removed the bolt from an M98 mauser. While it was out the safety was accidentally pushed to the left and now I can't get the safety back to the middle or get the bolt back in the action!
1 - 6 of 6 Posts
If you go through these safety steps for disassembly of the bolt you should be able to get your problem fixed. I know I ran into the same problem when I first got my Mauser.




http://www.mausershooters.org/k98k/SC_safety.html
I fixed it already. I used an old mosin bayonet to cock the sear then flipped the safety
That's great that you got it taken care of. Just thought I'd lend my two cents in. Now the next this happens you'll be able to assist :)
Thank you. I just happened to figure it out before I got back on the forum
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top