Glock 27 update

Discussion in 'Glock Forum' started by glockcoma, Mar 22, 2012.

  1. glockcoma

    glockcoma New Member

    109
    0
    0
    Well i took my new 27 out to the range today. My first impression is its a lil diffrent its going to take some getting use to nothing that a bit of practice wouldnt cure. I only put 100 rounds through her. She feels good in the hand even with the flush 9rd mag my pinky hanging off dosent bother me. I also added the pearce +2 exstention on my other two mags and they worked flawless. I did have a failure to fire but i credited that to a bad round i pressed the trigger CLICK, waited ejected the round inspected it had a primer strike. Reloaded the round charged again CLICK yeah bad round kinda suprised me. It was wwb i never had that type of malfunction with that ammo before. All in all a great little piece that packs a punch. I kno i gotta put another couple hundred rounds through it before i dedicate it to my main edc piece. That CLICK wasn't a good feeling, Im just going to have to carry my 23 still for now, she all ready been through BOOT CAMP and earned her RESPECT!!!.
     
    Last edited: Mar 22, 2012
  2. Robbie762

    Robbie762 New Member

    73
    0
    0
    I've finally got used to mine, just put a stainless steel rod and spring assembly on it and it actually made a big difference in the way it handles. Also put an extended slide release and a set of Truglo fiber optic sights. The rod and spring turned it into a keeper.
     

  3. lyodbraun

    lyodbraun New Member

    164
    0
    0
    Congrats on the new 27 I love my gen3 27 its a great little gun, although I dont carry it anymore LOL been replaced with my G30SF... I found with my 27 I shoot high for some reason ??? but with my Gen4 23 and 30SF im dead on... well enjoy your new Glock and be safe happy shooting
     
  4. glockcoma

    glockcoma New Member

    109
    0
    0
    Here go mines, a great piece that packs a punch. Just as accurate as my 23. I just had Xs sights installed before i left to go visit family in NY, i just got back so i haven't been to the range yet to try em out. It took over as my main edc piece i love it.

    ForumRunner_20120421_120802.jpg



    ForumRunner_20120421_120851.jpg
     
  5. sparky80

    sparky80 New Member

    407
    0
    0
    What brand rod and spring did you use?
     
  6. okdonk

    okdonk New Member

    2,821
    0
    0
    You can easily get RSA from glockstore.com. They have the stainless or the tungsten.
     
  7. Robbie762

    Robbie762 New Member

    73
    0
    0
    I got it from glockmeister, it was their brand
     
  8. DON1937

    DON1937 New Member

    13
    0
    0




    What is the difference you've noticed after changing the rod and spring? I'm considering changing these in my 26.
     
  9. Robbie762

    Robbie762 New Member

    73
    0
    0
    It toned down the "muzzle flip" that the smaller guns all seem to have. The kick is still there, just not as much as before.
     
  10. GaMatt72

    GaMatt72 New Member

    456
    0
    0
    I went to the range today with my new to me G27. It has a bit more recoil then the G22 but after a few mags I got use to it. It was a LE trade in so it is plenty broke in. I live it and it will now be my main carry weapon.
     
  11. glockcoma

    glockcoma New Member

    109
    0
    0
    I love my 27 also, took mines to the range finally shot it with the Xs sights man is it great i have the +2 mag extention for a couple of my mags but i carry it and shoot with the flush mag anyway my pinky hanging off the grip don't bother me a bit when i shoot i like the recoil of the 40 i can control my 27 with flush mag just as well as my 23 if not better, GOTTA LOVE XS SIGHTS. My 27 is quickly becoming my favorite glock i own.
     
  12. boshjaugh

    boshjaugh New Member

    2
    0
    0
    I have been really kicking the idea of the XS Big dot sights around. I love the way the look and everyone that has them seems to have nothing but positive things to say. Do you feel that you can shoot the gun as accurately as before?
     
  13. sparky80

    sparky80 New Member

    407
    0
    0
    The XS sights are POA, correct? I have also been contemplating them.
     
  14. lyodbraun

    lyodbraun New Member

    164
    0
    0
    Just installed a set of the Xs sights on my 30SF last night ... look forward to going to the range and trying them out...