Firearms Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
192 Posts
The ammonia in Windex will neutalize the corrosive salts. Remember to spray down the bore, bolt and action as the chemical that promotes rust will go any where fouling goes.
Ammonia does nothing to remove corrosive salt fouling. It works on copper fouling. All thats needed to remove corrosive primer fouling is hot water run through the barrel and bolt face areas. Windex is ,what, 99% water? Seems like expensive water to me.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top