First pistol/SBR build

Discussion in 'NFA/Class 3 & FFL Discussion' started by brettc, May 19, 2013.

  1. brettc

    brettc New Member

    118
    0
    0
    Well I'm onto my second build finally and I've decided on going with a 8.5" ss noveske barrel, stripped spikes lower, BCM bcg, stripped aero precision upper (or one of the other uppers I would be satisfied with when they come back into stock!), and spikes lpk. Not a full list of parts but that's the main parts I have/have decided on. I plan on running a kx3 on it, so one of my main questions is where to start on buffer weight? I was going to get a spikes heavy buffer and just go from there. I thought maybe someone had this setup already and could provide some insight. Thanks for the help everybody.
     
  2. robocop10mm

    robocop10mm Lifetime Supporting Member Lifetime Supporter

    11,380
    1
    0
    The heavy buffer is a start. If you find you have isues, you can get powdered tungston from a golf supply store and add weight
     

  3. brettc

    brettc New Member

    118
    0
    0
    Great, thanks for the tip.