First AR build, need buttstock help.

Discussion in 'AR-15 Discussion' started by BodySnatcher, Dec 3, 2012.

  1. BodySnatcher

    BodySnatcher New Member

    97
    0
    0
    Gentlemen, I am looking to build my first AR. I am wanting to build it as a long range piece. 20-24 inch barrel (24 looks like those are hard to find, so probably 20).

    I am just getting started with the lower, and working on the wife for more budget money... :rolleyes:

    So far I have a Quentin Defense U.S. Army billet lower. (I fell in love with that rollmark.) And a Daniel Defense parts kit. I know at some point I'll need a trigger upgrade.

    I am looking at buttstocks and just can't seem to decide between the Tactical Intent TI-7, Ergo F93, and the Magpul ACS (all mil-spec).

    Any help deciding between those would be appreciated for the type of shooting I am building for.

    If I am way off base on those, please feel free to tell me so, but please propose an alternative. And yes, I know, I should a want a Magpul PRS... the budget officer will not allow that level of expenditure. I need to be in the $150 range for the buttstock, spring, buffer, nut, etc.

    Thank you.
     
    Last edited: Dec 3, 2012
  2. Squawk

    Squawk New Member

    864
    0
    0
    For long range, I'd save up and get the Magpul UBR. Great stock but will cost over $200. I have a ACS-L and a UBR on 2 different AR's. The UBR gets shot a lot more.

    The UBR comes with a proprietary buffer tube.
     

  3. Quentin

    Quentin New Member

    7,551
    1
    0
    Great choice on the Quentin Defense U.S. Army billet lower! I have one too that I haven't built up yet. I also have a DD LPK for it and an ACS. Really all I need is the receiver extension, buffer, etc. Don't know why I haven't put it together yet. With a 20" barrel how about the A2 rifle stock?

    BTW, Quentin is my name but I am not affiliated with Quentin Defense except as a customer.
     
  4. BodySnatcher

    BodySnatcher New Member

    97
    0
    0
    I have a large family and no matter what I do every one wants to shoot "Dad's gun" so the adjustable makes everyone comfortable.

    I have been thinking of the A2 stock but rejected it for the lack of adjustment.
    Now if there were a way to accomplish that, I wouldn't mind the weight in the back end (of the gun fellows, the gun, not the wife... ;) ) to balance what will be a heavy front end.
     
  5. AgentTikki

    AgentTikki New Member

    3,496
    0
    0
    Id shy away from the egro, there's a reason why Magpul dropped the design, but it does look cool.

    Consider the Vltor imod too it also has modular check weld pieces.

    Honestly the best thing to do is visit a well stock store and handle them for yourself. A big gun show should have all the models on display to handle too. Pictures and advice can only go soo far.

    .
     
  6. Quentin

    Quentin New Member

    7,551
    1
    0
    Good point on the A2 when you have multiple shooters. My vote would be for the ACS then. I actually like the CTR better but most of my ARs are light profile 16". The extra weight of the ACS would match a longer barrel better. Have you also looked at the ACS-L and STR?
     
  7. BodySnatcher

    BodySnatcher New Member

    97
    0
    0
    Good advice AgentT, I'll take another pass at the Vltor product.

    Yes Q I have looked at those, the ACS-L I tossed out simply because the 'L' was for light ...I assumed "light weight" which isn't a consideration for this build. And the STR just doesn't float my boat.

    Thanks guys, I really appreciate the input.
     
  8. climate17

    climate17 New Member

    39
    0
    0
    Magpul acs hands down.
     
  9. Quentin

    Quentin New Member

    7,551
    1
    0
    Yeah the ACS-L is lighter than the original ACS but only a couple ounces. And you lose the extra storage and nice cheek weld.
     
  10. oldpapps

    oldpapps New Member

    173
    0
    0
    Two items to consider.
    First, the A2 stock is always the same and solid.
    Second, a 20 inch barrel is great, but can be nose heavy, particularly with a heavy profile. I've got one, it's great to shoot but I don't want to have to carry it far and I do carry my M1A and Garands with no complaints.
     
  11. AgentTikki

    AgentTikki New Member

    3,496
    0
    0
    Also just so you know, they make rifle length, collapseable stock receiver extentions. WoW. That really needs a better name or at least an acronym :eek:
     
  12. dwmiller

    dwmiller Well-Known Member

    3,484
    145
    63
    Try searching for ar wood stocks. I went this way on my last build just so it didn't look like every other ar at the range.

    Also the heavy profile 20" barrel is just about all the weight you will want to carry. I wish i had gotten fluted to save a few more ounces..
     
  13. BodySnatcher

    BodySnatcher New Member

    97
    0
    0
    Went with the ACS $120 as a kit with tube, nut, buffer, etc.

    So with everything the lower is right at $400.

    Now to find some gold flake paint to color the rollmark...

    A BIG thanks to everyone who posted. I'm sure I'll be back soon with upper questions...
     
  14. AgentTikki

    AgentTikki New Member

    3,496
    0
    0
    good to hear it mr body snatcher!



    and

    just wanted to share that everytime I read the tittle, the Butthead in me snorts "heh heh heh heh he wrote Buttstock heh heh heh" :p