Favorite shotgun bore cleaner?

Discussion in 'General Shotgun Discussion' started by GaryO, Jul 24, 2013.

  1. GaryO

    GaryO New Member

    8
    0
    0
    What say you? Thanks...
     
  2. elfmdl

    elfmdl New Member

    401
    0
    0
    Hoppes works for everything!
     

  3. GaryO

    GaryO New Member

    8
    0
    0
    Seriously? Hoppes does not touch plastic fouling...
     
  4. John_Deer

    John_Deer New Member

    6,624
    1
    0
    I just use remington 40x bore cleaner or CLP sprayed on an old bore mop. A little elbow grease is required to remove the plastic no matter what is used.
     
  5. elfmdl

    elfmdl New Member

    401
    0
    0
    Worked fine for me....
     
  6. Hawg

    Hawg Active Member

    1,505
    1
    38
    Have a lot of it.

    [​IMG]
     
  7. shadecorp

    shadecorp Active Member Supporter

    1,463
    10
    38
    Always used Hoppes.9 or Break Free C L P.
    Cant beat the aroma of Hoppes
     
  8. indy36

    indy36 New Member

    1,106
    0
    0
    Ballistol is my favorite. Better than Frog Lube, CLP, #9, etc....in my humble opinion, based on my experience with all of them.
    image-1585034697.jpg
     
    Last edited: Jul 24, 2013
  9. kfox75

    kfox75 Well-Known Member Supporter

    7,307
    263
    83
    Gunzilla. Best CLP I have ever used, and it works best as a dry lube. Wipe the excess off, and you can bury the shotgun in sand without any of it sticking to the gun. I have had zero operational issues cause by lubrication since I started using it. Good enough product that I have the smith at my LGS order it for me a gallon at a time.

    This is the only product that I have found that I do not need to soak into the fried on Pyrodex in the barrel of my Wolf after shooting it. After applying it once, the burned black powder does not stick to the inside of the barrel. truely a great product.

    Here's a link to their home page: http://www.gunzilla.us/ check it out.
     
  10. armsmaster270

    armsmaster270 New Member

    755
    0
    0
    Have 3 gallons of Break Free CLP and just changed to Frog Lube Paste for rails and liquid for bores and moving parts. Guess the Break Free is for general lubing around the house for the next 2 generations.