Failure to Extract Last Round P238

Discussion in 'General Handgun Discussion' started by LandMonster, Aug 22, 2013.

  1. LandMonster

    LandMonster New Member

    148
    0
    0
    Went to the range today to put first 100 rounds through my new Sig P238. I was at round 92 and thinking to myself "wow this is the first time a semi auto worked flawlessly at the first range visit" when the last round in the mag failed to eject clear of the breech. It rolled right out and I noticed the case was badly damaged. I was able to replicate the malfunction once more but then it worked fine for another 15 rounds.

    I attached a pic of the damaged rounds and two examples of the other 99 good ones.

    Will clean and lube then try again. For the most part happy. It did go bang every time and the two problem child's were just resting in the breach literally lolling around on the mag follower. Dropping the mag would have solved the problem.
     

    Attached Files:

    Last edited: Aug 22, 2013
  2. utf59

    utf59 New Member

    676
    0
    0
    I found your problem. ^ ^ ^ :D

    On a more serious note, there are some posts on this blog (they should be lined up for you if you follow the link) about what looks like the same problem. This apparently showed up from time to time on this model. From what I understand, newer editions shouldn't have this problem, but I'll leave that to you to sort out.

    I bought a P238 that was used but unfired, and I think it's one of the newer variety. I was worried about this happening, but I was lucky, I guess...no issues (knocking on wood).

    The good news is that it appears Sig will fix the problem and get you up and running.
     

  3. LandMonster

    LandMonster New Member

    148
    0
    0
    I know! You don't even have to say it out loud. A stray thought is enough to jinx the whole thing!

    That blog sounds a lot like what I had going with the mangled cases. Only difference I can see is that mine only happened on the last round. I had no ftf or failure to extract. Just failure to eject the last round. I wish he posted pics of his cases to see if it was the same type of damage.

    I guess it begs a question about diagnosing a problem by the spent cases...
     
  4. robocop10mm

    robocop10mm Lifetime Supporting Member Lifetime Supporter

    11,380
    1
    0
    Small, light pistol. Last round out of the mag. Gun is a light as it is going to get. Your grip may not be as positive after shooting the mag full. All receipes for limp wrist malf's.

    The case failed to eject and was forced back into the barrel hood causing the damage shown.
     
  5. LandMonster

    LandMonster New Member

    148
    0
    0
    It's possible except it locked back both times. It makes it very curious.