?? comment on this upper ??

Discussion in 'AR-15 Discussion' started by suzychapstick, Nov 5, 2012.

  1. suzychapstick

    suzychapstick New Member

    82
    0
    0
    I never had a AR 15 before. When I buy something I like to buy it good. If I don't, it wont be long before I outshoot it, out ski it, out drive it, or whatever. This is the upper someone else reccomended from another message board. Please give my your thoughts or comments. Tell me what you like or dislikes about it. Pick it apart please. http://www.bravocompanyusa.com/BCM-...-Receiver-Group-p/bcm-urg-18 ss410 vtrx13.htm
    I have a bunch of .223 in 55 gr and a little in 62gr. I also have a few 5.56 62gr. I've always been one to lean towards the extra barrel length and weight for accuracy. You can also give me your guesses on what type of MOA it shoots, versus something shorter and lighter? Also reliability of this in heavy repeated firing? I don't know if it's a tight chamber or what? Or if this is better for .223 or 5.56, or be more prone to cause problems w/ one or the other. The guy that reccomended this, said that sometimes they drill gas ports in the wrong places. I no nothing about these, but I used to work as a basic machinist and a upscale welder for years. So my mechanical abilities are above average.
     
  2. Quentin

    Quentin New Member

    7,551
    1
    0
    It should be a fine upper and the 1:8 twist is ideal for 55-62 grain ammo. As far as reliability, with BCM that's almost a 100% given. As far as accuracy I doubt it's that much better than a fine 16" barrel and for that reason I'd be looking at a 16" midlength but my requirements are different than yours.

    As far as gas ports, BCM knows what they're doing. That said, I didn't see whether this uses midlength or rifle length gas. Or even intermediate length which should be ideal for 18".
     
    Last edited: Nov 5, 2012

  3. AgentTikki

    AgentTikki New Member

    3,496
    0
    0
    It has a 5.56 nato chamber so it not really a precision oriented build. The stainless will not be as durable or easy to clean as a chromelined barrel, but should be a smidgeon more consistent. The 18" will give you a little more velocity, and the heavy profile will stand up to heavier repeated firing than a medium or light weight profile.

    All in all, I can't say I'd recommend it for a precion oriented build. It should at last hve a wylde chamber.
     
  4. suzychapstick

    suzychapstick New Member

    82
    0
    0
    I'm glad to see these two faces again. Well, that sounds like a good upper if your only going to own one. Which was my intention before. I've seen longer varmint ones advertised. Being I got three receivers, I been contemplating making one for accuracy. Then I was thinking of trying to find some slightly used one that somebody bought as a package, then upgraded there upper. I would think the lower grade ordinary stock stuff would be built loose. So it may serve as a lighter shot range thing if they handle heat OK? I'm going to have to rethink this upper purchase.
     
  5. RobertsDefense

    RobertsDefense New Member

    18
    0
    0
    BCM is pretty much in my back yard up here in WI. Great people, great company built on solid parts at a reasonable price. With that said, they are great uppers if you are going to put a holo sight on it and go have some fun at the range. They don't use super high end barrels so punching ragged holes at 100 probably isn't going to happen. If you are looking for a precision AR, you would be happier with a better barrel.
     
  6. AgentTikki

    AgentTikki New Member

    3,496
    0
    0
    Oh man, you got a terminal case of BRD.

    3 recievers is a whole lot of stuff to plan. :)

    Have fun!
     
  7. Garadex

    Garadex New Member

    1,267
    0
    0
    It means you need more lowers!