colt frontier scout timing problem

Discussion in 'Revolver Handguns' started by 70sdiver, Feb 26, 2009.

  1. 70sdiver

    70sdiver New Member

    1
    0
    0
    Ok I had my ex father in law gave me a pistol about 10 years ago it is in pieaces,I was able to find a diagram and reassemble it.I cocked the hammer and it cycled fine the first time.Tried to cock the hammer again and got it to the first click maybe a 1/4 cock and it locks up.If I pull the cylinder out it cocks fine and the hammer drops fine also.The cylinder is the .22mag it didnt have the .22 lr cylinder so Im also wanting to find one.Im thinking it is a timing problem?if so how would I time it?
     
  2. mark1945

    mark1945 New Member

    14
    0
    0
    You can get the 22 lr cylinder from Numrich Arms co..It will have to be fitted to the frame,or at least mine did ,it was no problem for me as I have lathes,and a mill to make adjustments to fit with.Timing is kinda tricky to fix. I love mine its a great fun gun to shoot,very accurate .
    Mark