Colt 38 spl Commando trigger problem.

Discussion in 'Gunsmithing Forum' started by Windward, Apr 7, 2014.

  1. Windward

    Windward New Member

    1
    0
    0
    I have a Colt commando revolver where the trigger does not want to return to its original position after firing. I took the gun apart and cleaned everything well. The mainspring seems strong and has a lot of tension. There seems to be many touch points that could be causing friction. Any thoughts on what the likely issue may be?

    http://www.coltautos.com/DA/Commando/commandoprt.htm

    Thanks!


    Sent from my iPad using Firearms Talk
     
  2. danf_fl

    danf_fl Retired Supporter

    12,361
    33
    48
    Welcome to the Forum. When you get a chance, stop by our "Introductions" area.

    Now to the problem. I do not have much experience with Colts, but I would think that there would be a trigger return spring that needs cleaning or replacement.

    Also, parts could be worn too far.

    I would suggest that you allow a gunsmith to physically check it out.