Cleaning Supplies for M&P sport ar-15

Discussion in 'General Rifle Discussion' started by glock619, May 20, 2013.

  1. glock619

    glock619 New Member

    3
    0
    0
    Hey, getting my first rifle. Have no idea what is needed for cleaning and lube. Please recommend some fairly affordable options.

    Would you recommend a bore snake?
    What kind of cleaning solution?
    What kind of oil?
     
  2. PathfinderAFW

    PathfinderAFW New Member

    24
    0
    0
    You're going to get as many different suggestions as there are brands of ar. PERSONALLY I prefer Otis's kits as there is a near zero chance of scratching the bore. They are pricy though. A boresnake is good for field cleaning but not adequate for detail jobs (which should be done if possible). I keep a boresnake in my grip for shtf but for everyday cleaning I use the Otis. As far as lube and solvent I like safari land CLP. Where I'm at it can be bought at Walmart. Break free is another good brand. Q-tips for the receiver and bolt carrier and pipe cleaners for the gas tube are also a must.
     

  3. PathfinderAFW

    PathfinderAFW New Member

    24
    0
    0
    CLP acts as a solvent, rust protector, and lubricant. It's an all in one. You can go separate and get hoppes no 9 for solvent and Lucas gun oil for the protectant and lube but I prefer all in ones.
     
  4. locutus

    locutus Well-Known Member Supporter

    16,635
    834
    113
    I like a good coated steel single piece rod, a bore guide, a prosphor bronze bore brush, Shooter's choice solvent and Rem-Oil or EEZOX for a lubricant.

    Really most name brand solvents and lubes work well. I don't use heavy grease on my ARs.
     
  5. bige91603

    bige91603 New Member

    842
    0
    0
    I use militec 1 with a milspec cleaning kit
     
  6. MrPEZO

    MrPEZO New Member

    41
    0
    0
    Mine came with a Mil spec cleaning kit. But a good rod like a Tipton or and Otis kit will work. You can use solvent or all in one like CLP or Breakfree. Lube I and most use motor oil,
     
  7. John_Deer

    John_Deer New Member

    6,624
    2
    0
    Until you learn the ropes a regular Outers kit and a can of CLP from Walmart will do the trick. All of the things listed above have merit and are of great use. You need to do some shopping to learn what brands are reliable and efficient. You might not have to buy anything. Someone in your family might have everything you need.
     
  8. locutus

    locutus Well-Known Member Supporter

    16,635
    834
    113
    I use Dewey single piece rods, but Tipton, Otis, Bore-teck and a few others are all excellent.

    But I avoid jointed rods and aluminum rods like the plague.

    Jointed steel rods are okay for rare use in the field.

    www.brownells.com

    www.sinclairintl.com

    have excellent selections of cleaning supplies and equipment