Chinese Model SK

Discussion in 'General Rifle Discussion' started by Skoal_Chewin_Redneck, Mar 25, 2009.

  1. Skoal_Chewin_Redneck

    Skoal_Chewin_Redneck New Member

    3
    0
    0
    This is concerning a chinese model SKS with a sythetic stock. Does anyone have information on how to disassemble THIS SPECIFIC gun... there is a little lip on the stock behind the reciever cover that dont allow me to slide it back once unlocking the pull pin. do i have to disassemble the trigger ground before removing this part? it is a chinese model screwed in barrel with triangle stamp listing the numbers 26 inside the triangle on the plate below the bolt of the gun. appreciate the help from anyone thanks!

    here is the firearm i can add more pics if required...
    url=http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=428933277&albumID=612683&imageID=7384350
     
    Last edited: Mar 25, 2009
  2. subie-jeep

    subie-jeep New Member

    148
    0
    0
    you should just have to flip up and pull out on the pin then it should just slide back easy.
    maybe if you posted a pic of the lip you are talking about i could help out alittle more.
     

  3. Benning Boy

    Benning Boy New Member

    9,624
    1
    0
    Should flip back toward you 90 degrees, then wiggle it to the left. Whole thing will lift off, but these things can be stiff, especially if it was "Bubbaed".
     
  4. Skoal_Chewin_Redneck

    Skoal_Chewin_Redneck New Member

    3
    0
    0
    RE: Chinese SKS

    it is pretty damn stiff now that u mention it. i have never got this gun apart and have owned it for about a year. here are some pics

    <a href="http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=428933277&albumID=612683&imageID=11783218"><img src="http://hotlink.myspacecdn.com/images02/72/0d8b6758d3fa42d78f55f1ca158dd53d/m.jpg" alt="" /></a>

    <a href="http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=428933277&albumID=612683&imageID=11783220"><img src="http://hotlink.myspacecdn.com/images02/78/99b6a62043dc4bcca001a40b1df4364b/m.jpg" alt="" /></a>

    <a href="http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=428933277&albumID=612683&imageID=11783217"><img src="http://hotlink.myspacecdn.com/images02/110/bf6722174e3841baa702fb913520faa5/m.jpg" alt="" /></a>
     
  5. Skoal_Chewin_Redneck

    Skoal_Chewin_Redneck New Member

    3
    0
    0
  6. allyellow

    allyellow New Member

    68
    0
    0
    GunManuals.Net



    this might help didn't think the first one worked.
     
  7. subie-jeep

    subie-jeep New Member

    148
    0
    0
    ok i see now. i think you will need to remove the trigger group (behind the trigger guard is a button,put the saftey on and push on the button with a screw driver and it should pop out. if you have a pistol grip you may need to remove it first) and mag.then push up through where the trigger group was and the stock should come off.you may have to remove the gas tube also.

    this video may help you out,too.once you know how it should come apart you can probably figure it out.
    [ame=http://www.youtube.com/watch?v=Ng_Kdn3JQDQ]YouTube - SKS Disassembly and cleaning - part 1 of 2[/ame]