Chamfering inside/outside of case neck at sime time?

Discussion in 'Ammunition & Reloading' started by Squirrel_Slayer, Oct 29, 2010.

  1. Squirrel_Slayer

    Squirrel_Slayer New Member

    Does anyone know of a tool maybe made by RCBS, Lyman, or Lee maybe, that can be chucked into your case trimmer that will chamfer the inside and outside of the case neck at the same time?
  2. mrm14

    mrm14 Active Member

    RCBS makes them and they work pretty good.

    Link wont work for this part in their online site. Go to RCBS site and type in Trim Pro 3-Way Cutter in their search box.

    Heres a PDF download of their catalog. It's on page 12.
    Last edited: Oct 29, 2010

  3. Snakedriver

    Snakedriver New Member

    I use the Lyman Inside/Outside Deburring Tool and really like it. You can use it by hand with the provided handle or you can take the head off the handle and screw it into your case trimmer to debur that way. It's a fast and efficient way to dress the case necks after trimming. :cool:
  4. cpttango30

    cpttango30 New Member

    I prefer to use the lyman VLD for the chamfer then I use the RCBS for deburring the outside of the case neck. I like the more gentle angle of the VLD chamfer over the harsh 45deg angle of the regular chamfer tool.

    If you are going to do large batch processing of brass for a long progressive loading session I would invest in the RCBS or Hornady case prep stations.