Cartridge Adaptors

Discussion in 'DIY Projects' started by hiwall, Sep 20, 2012.

  1. hiwall

    hiwall Active Member

    4,268
    20
    38
    I was bored the other day and made this to pass the time. It is a supplemental chamber so you can shoot .32's in a 20 gauge shotgun. This one is rifled and will use .32 S&W shorts and longs. I will try it soon. It should be fairly quite(I hope). I also made a 20 gauge to .410 adapter earlier. Neither are practical but are functional.
     

    Attached Files:

  2. Mongo

    Mongo Active Member Supporter

    1,549
    8
    38
    I have a 308/32 cartridge adaptor

    got it from Numrich. I bought a second that I would like to bore out to shoot 30 carbine. I can't seem to find the reamer. I'm shooting through a "Handi Rifle". The .32 adaptor will shoot 32S&W short/long and ACP. It's fairly quiet.
     

  3. hiwall

    hiwall Active Member

    4,268
    20
    38
    I took it to the range a couple days ago. Was much louder than I expected. Had to wear hearing protection even when using shorts. Even though it was rifled I expected poor accuracy and it turned out to be poor. But I spent nothing and had a little fun.
     
  4. Tylos

    Tylos New Member

    63
    0
    0
    ..... .....
     

    Attached Files:

    Last edited: Oct 1, 2012