Bi-Tone maintenance?

Discussion in 'XD Forum' started by SGT_Calle, Jan 17, 2010.

  1. SGT_Calle

    SGT_Calle New Member

    130
    0
    0
    I'm going to buy a new XD 45 compact and I'd really like to find a bi-tone one. Is there anything you have to do to keep the stainless looking good? I'm just trying to find out what I'm getting into before I drop the extra dough.

    Thanks All!
     
  2. CA357

    CA357 New Member Supporter

    19,847
    3
    0
    Just try not to scratch it. It's pretty hard not to and scratches are part of a gun's character anyway. Unless it's a safe queen, it going to get worn and marked. Maintain it well, keep it clean and lubricated and shoot the heck out of it.

    Remember, when all is said and done, it's a tool. ;)
     

  3. Don Davis

    Don Davis New Member

    421
    0
    0
    I just wipe it down with a silicone rag every time I use it.

    [​IMG]

    Mine is not showing much use - I've had it 9 months or so.

    :)
     
  4. SGT_Calle

    SGT_Calle New Member

    130
    0
    0
    This will be no safe queen. I plan to carry it on a regular basis, I just don't want to trash it up, lol. Thanks for the advice!
     
  5. IGETEVEN

    IGETEVEN New Member

    8,358
    4
    0
    Mother's Mag & Aluminum Polish & Cleaner.

    Stainless is easy to maintain and you can polish it up, remove powder residue, restore and protect the finish really easily compared to blued or nickel finishes. It's fairly easy to get light scratches out of stainless and it maintains that bright, shiny and new look like the day you purchased it and it is gentle enough to use on a regular basis. A silicon rag works great also. ;)

    I use Mother's, and IMHO, it works very well on all of my firearms, without incident.

    Jack
     
  6. Don Davis

    Don Davis New Member

    421
    0
    0
    +1 for mothers - I use it on my corvette. :)
     
  7. canebrake

    canebrake New Member

    21,833
    2
    0
    Just get a couple silicone rags and wipe down every time you are going to put it away/holster.
     
  8. SGT_Calle

    SGT_Calle New Member

    130
    0
    0
    Great looking XDm BTW Don! How do you like shooting with the Crimson Trace grips?
     
  9. N.D.

    N.D. New Member

    154
    0
    0

    +1 Yes I'm also very curious about the laser grips and their ergonomics & cost?

    N.D.
     
  10. Don Davis

    Don Davis New Member

    421
    0
    0
    I really like the Crimson Trace Laser grips.

    I have them on My Kimber .45 - my Glock .26 and these were on my XD.

    When I bought XDm I called CT and asked if the CT had grips for the XDm ..

    Long story short and in my words not theirs ..

    They do not make CT's for XDm yet

    And do not know when they will.

    They said that with the XDm having 3 sized grips they could not control which grip the customer used ... etc. etc.

    So I measured the XD grip and it was the same size as the middle grip on the XDm (the one that came on it from the factory).

    I installed it on my XDm and it fits great.

    I really like shooting with the laser grip - I'm very accurate (for me) shooting with it.

    Several hundred rounds and it's never lost it's point of aim.

    I love it.

    :)