Barrel Bath Cleaning Idea

Discussion in 'General Rifle Discussion' started by Ranger-6, May 4, 2012.

  1. Ranger-6

    Ranger-6 New Member

    804
    0
    0
    I was wondering what type of barrel baths do other shooters use? I picked up a reel top poultry feeder #9824 at Family Farm and Home to use for soaking the barrel of the 4595TS during the cleaning phase. The feeder is 1-1/2" deep, 3-1/2" wide and 24" long, just large enough to lay the barrel. I then pour in the cleaning solution and let the barrel sit for 15 minutes or so, then take a tooth brush to scrub it down.
     

    Attached Files:

  2. Rex in OTZ

    Rex in OTZ Active Member

    3,284
    22
    38
    Rubber stopper method (economical)

    With a economy of materials its just a easy to clean just the inside the bore.
    I stand the rifle up (removed from stock) plug the chamber with a rubber stopper and pour about 1 oz of cleaner down the bore.

    Not a great stretch to electro clean the bore that way.

    When finished the rubber stopper is easy to stow, in my cleaning kit than the tray.
    My dirty/used cleaning solution is minimal as well, when it comes to disposal.


    If I need to soak the whole barrel& action minus the stock I'd use my PVC fishing rod case (2" PVC x 4 foot long)
     
    Last edited: May 4, 2012