AR15 build

Discussion in 'AR-15 Discussion' started by samboost, Nov 17, 2012.

  1. samboost

    samboost New Member

    7
    0
    0
    Hello, this is my first post in this forum and I just finished building an AR15 from alpha shooting sports and they have been extremely helpful in my build. It is my first AR also, I've always been a bolt action or mini 14/30 guy because of the California bullet button. You can also check them out at AR15hardware.com
     

    Attached Files:

  2. samboost

    samboost New Member

    7
    0
    0
    Does anyone have experience with the nickel boron bcg or upper receiver? Is it worth it?
     

  3. Quentin

    Quentin New Member

    7,551
    1
    0
  4. samboost

    samboost New Member

    7
    0
    0
    Sorry it's a 16 inch melonited barrel with a 11 inch Troy trx rail with magpul folding sights. Chrome BCG. The lower is a LAR grizzly.
     
  5. AgentTikki

    AgentTikki New Member

    3,496
    0
    0
    if you really have a hard time cleaning off your bcg, i can see you wantings a ni bor or chrome bcg, but srsly not worth the extra cost imho. I have a chrome bcg, looks nices but srsly would have rather spent the extra mag for it on extra mags or something.


    As for a ni-bor reciever.....its all cosmetic bling. If you like the way it looks, by all means, go for it. You'll find most people will opt to forgo ni-bor coatings anywhere on your AR.
     
  6. purehavoc

    purehavoc New Member

    4,799
    2
    0
    keep the BCG lubed up well with mobil 1 synthetic and carbon buildup wont be a issue ;) NI-bor is flashy yes but really not needed , spend your hard earned money on magazines and ammo . you can never have enough of those . By the way thats a fine looking rifle you got there now go out and have some fun with it and give a range report on it