Apex FSS question

Discussion in 'M&P Forum' started by chachimacho, Sep 30, 2013.

  1. chachimacho

    chachimacho New Member

    64
    0
    0
    image-3742871445.jpg
    I installed the FSS kit and RAM a while ago, and just noticed that approximately half of the trigger bar loop is engaging the sear. It's not affecting reliability, just something I'm concerned about. There seems to be some spring tension pushing the trigger bar off to the right, which is why I'm only getting half the loop to engage. Anyone else have this issue?
     
  2. mountainman13

    mountainman13 New Member

    11,488
    0
    0
    You should look more closely at how your firearm functions before swapping out the components.
    All is as it should be. You have no issue.
     

  3. chachimacho

    chachimacho New Member

    64
    0
    0
    I know how my firearm functions, thank you for the reprimand, though. My Shield has full engagement and the FSS kit I did for a friend has full engagement, as did mine when I installed it.
     
  4. mountainman13

    mountainman13 New Member

    11,488
    0
    0
    You're quite welcome macho.
    Do you have another stupid question that you know the answer to? I'd be happy to reprimand you again.
     
  5. chachimacho

    chachimacho New Member

    64
    0
    0
    If I knew the answer as to why, I wouldn't be asking. Stupid question? I don't think so. I believe it may have something to do with the trigger return spring wanting to twist the trigger bar to the right, but I'm not sure. Like I said, it was fine when I installed it. You're initial response rubbed me the wrong way, assuming I don't know what I'm doing. If that wasn't your intent, I apologize. If it was your intent and you have no constructive advice, then I think we're done here .
     
  6. mountainman13

    mountainman13 New Member

    11,488
    0
    0
    Wasn't assuming you don't know what you're doing just that you don't fully grasp how the system works. If you took the time to look at how the parts function you would have your answer.
    The fact that you don't have the answer shows that you don't really know what you are doing.
    Do to your response I'm not going to walk you through it.
    I don't give a sh!t how I rubbed you.
    Feel free to rub yourself the right way.