Firearms Talk banner

1 - 20 of 22 Posts

·
Registered
Joined
·
5,730 Posts
Discussion Starter · #1 ·
Does anyone have a Buckmark rifle on this forum? We are trying to get Tactical Solutions to make a run of their lite weight threaded end barrels for the Buckmark rifle and need to get 12 more barrels or people wanting them before it will happen. If you are interested and serious about it,send me a PM and I will get back with you on who to contact about this. They said they would make a run of 30 barrels if there are enough people to commit,and so far we only have 8 accounted for and we need atleast 20 before he will go forward with this. THB
 

·
Registered
Joined
·
7 Posts
buckmark rifle barrel!

I know them as well land have several for the ruger MKIII and love them. I also sent them an e mail asking if they would make a barrel for the rifle. I just found this forum and joined it tonight! Count me in! Also I want to figure out a good clean way to put a set of swivles on for a sling. Hard to find anything on the wed about the buckmark rifle! I asked if they would make it like 16 and 1/4 just to make sure for the legal length! Too bad they dont make a ruger MKIII rifle! Amie :p
 

·
Registered
Joined
·
1 Posts
Buckmark rifle

Does anyone have a Buckmark rifle on this forum? We are trying to get Tactical Solutions to make a run of their lite weight threaded end barrels for the Buckmark rifle and need to get 12 more barrels or people wanting them before it will happen. If you are interested and serious about it,send me a PM and I will get back with you on who to contact about this. They said they would make a run of 30 barrels if there are enough people to commit,and so far we only have 8 accounted for and we need atleast 20 before he will go forward with this. THB
I am interested in getting a light barrel for my buckmark rifle also, I am constantly doing searches to see if any of the manuf. are making them and so far no luck. They seem to all make them for the pistol but not the rifle. So count me in as I have the heavy bull barrel and it shoots fine but would love to customize like my ruger 10/22 which the only orig part is the receiver which might be going soon.
 

·
Registered
Joined
·
5,730 Posts
Discussion Starter · #7 ·
I am interested in getting a light barrel for my buckmark rifle also, I am constantly doing searches to see if any of the manuf. are making them and so far no luck. They seem to all make them for the pistol but not the rifle. So count me in as I have the heavy bull barrel and it shoots fine but would love to customize like my ruger 10/22 which the only orig part is the receiver which might be going soon.
Reloaderbob,I sent you an email about this. Let me know if you didn't get it.
 

·
Registered
Joined
·
18 Posts
Browning Buckmark Rifle

That goes for me as well--when last I spoke with Tactical Solutions, I suggested they consider making a lightweight rifle barrel for the Buckmark rifle. I was told they've had several recommendations from Buckmark rifle owners for the same thing. It would certainly make my Buckmark rifle weigh a lot less. Further, my Buckmark pistol with their 7.25 inch from the bench shoots solid 3/4 inch groups with CCI Target ammo at 25 yards. I can only imagine what a Tactical Solutions Buckmark rifle barrel would do with target ammo--a one hole 3/4 inch group at 50 yards?
 

·
Registered
Joined
·
2 Posts
buckmark 22 rifle

I have a browning buckmark limited edition rifle their was 2500 made it was built in 2003. it has a carbon fiber barrel with multi color laminate stock, I can not find any accessories for it at all. any one out their know where i can find them? if i can't find what i want i'll just sell it
 

·
Registered
Joined
·
5,730 Posts
Discussion Starter · #12 ·
Bartman,you will probably have to have any color matching done on your own. I don't know of any aftermarket mfg's that have anything in that color.
 

·
Registered
Joined
·
8 Posts
I would buy two...

...since I have two of the little rifles. Probably go for different finished, if they were offered. I have a couple of their pistol barrels.

Be a nice project for when I get home (finally) from Baghdad next month.
 

·
Registered
Joined
·
5,730 Posts
Discussion Starter · #14 ·
MasterSergeantA,Right now Dennis is recovering from knee reconstuction,so the project is on hold. Let me know when you get home and I will keep you informed.
P.S. Thank you for your service,all of you guys & gals deserve a big pat on the back from those of us here at home. God bless,and stay safe. THB
 

·
Registered
Joined
·
1 Posts
Does anyone have a Buckmark rifle on this forum? We are trying to get Tactical Solutions to make a run of their lite weight threaded end barrels for the Buckmark rifle and need to get 12 more barrels or people wanting them before it will happen. If you are interested and serious about it,send me a PM and I will get back with you on who to contact about this. They said they would make a run of 30 barrels if there are enough people to commit,and so far we only have 8 accounted for and we need atleast 20 before he will go forward with this. THB
I've got one with a blk/lam stock,,ss bull barrel and slide..The frame is black.,,possibly anodized aluminum.Only had 200rds or so through it so far..what a sweetheart!!!The only accessories I can find are mags..Obviously I don't need a barrel yet,,but a custom spare would be nice...Can't find another one like it...I bought from Cabelas when they first opened here in Gonzalez La....I wanted two..but they said they were only alloted one...Buy the way...A buckmark will still be loud after you add on to the T/C barrel threads...Use a bolt action guys!!!...Quiet is always QUIET!!:eek:
 

·
Registered
Joined
·
2 Posts
I have a browning buckmark limited edition rifle their was 2500 made it was built in 2003. it has a carbon fiber barrel with multi color laminate stock, I can not find any accessories for it at all. any one out their know where i can find them? if i can't find what i want i'll just sell it
I have the same one ......... just recently picked it up in 99.9% condition - beauty of a rifle and I still have not shot it yet - but very, very soon. Any progress on locating a replacement barrel? Does anyone know if the heavy bull and carbon barrels are interchangeable? Just curious .......... the fiber sure is light weight! Gander Mountain had two of these come in on the same day from different sellers and I just happened to be there. The second was the heavy bull but I really liked the carbon models weight.

Here's my collection so far (less my Marlin 981T bolt action)
BBM Carbon Fiber .22LR
Ruger Mark II 5.5 SS Bull .22LR
Ruger Mark II 7.69 SS Slabside .22LR
Marlin 981 T Bolt S.L.LR
 

·
Registered
Joined
·
5,730 Posts
Discussion Starter · #17 ·
Hey guys,I haven't talked to Dennis in a while,but I would say that the deal with Tactical Solutions is on the back burner at this time. When Dennis tried to get this done there were several people that jumped on the wagon,and then when it was time to commit they disappeared.He needs atleast 20 commitments (i.e. a credit card#) before he will approach TacSol about this again,and then it will be up to them to decide on when they will produce them depending on their prior commitments with production.
The barrels were going to be the fluted/threaded end and only in black.
If you truly want one of these barrels contact Dennis at Mizzou Mule Guns,Phone# (907)351-7900 or Email him at [email protected].

Tell him Txhillbilly told you about it.
 

·
Registered
Joined
·
7 Posts
TSOL barrel! for buckmark rifle

Well I guess we are sol on the barrels for the buckmark rifle. For now any way. I would have bought 2 of them but when I called out there and talked to Casie they seem to have dropped the ruger 8" and are not going to make the one for the buck rifle.Thats a shame! So I bought up the last of the 8" they had! I have been winning league with the one on my ruger! 3 first place in a row now! Winter league starts up Jan 12 for another 10 weeks and this time I am going with iron sights on my ruger MKIII with the 8" paclite :) I think that if TSOL would make them it would be way better than a carbon fiber. It has been true hot or cold for competition! I shot a 469 twice out of 500 doing the 50 foot free stand at the B2 targets! My average of the 10 weeks was 458!! SO to say the least if I could get the TSOL barrel for the buckmark rifle guess what! I would have a tack driver at 30 yards!
 

·
Registered
Joined
·
3 Posts
I have the same one ......... just recently picked it up in 99.9% condition - beauty of a rifle and I still have not shot it yet - but very, very soon. Any progress on locating a replacement barrel? Does anyone know if the heavy bull and carbon barrels are interchangeable? Just curious .......... the fiber sure is light weight! Gander Mountain had two of these come in on the same day from different sellers and I just happened to be there. The second was the heavy bull but I really liked the carbon models weight.

Here's my collection so far (less my Marlin 981T bolt action)
BBM Carbon Fiber .22LR
Ruger Mark II 5.5 SS Bull .22LR
Ruger Mark II 7.69 SS Slabside .22LR
Marlin 981 T Bolt S.L.LR

i too have one of these guns and i looked and looked before i found out they were limited edition, and i got mine for a steal and unfired!!!!
 
1 - 20 of 22 Posts
Top