Ak trigger upgrade installation?

Discussion in 'Gunsmithing Forum' started by randall51286, Jul 29, 2010.

  1. randall51286

    randall51286 New Member

    2
    0
    0
    Hey guys I'm new to the forum I just purchased a Tapco G2 Trigger assembly for my psl and was wondering how to install it. It says that its a drop in assembly but i know it has to be more complicated than that. Has anybody attempted this yet? Please help
     
  2. stalkingbear

    stalkingbear Well-Known Member

    4,095
    30
    48
    It is basically a drop in installation. You can do a search on youtube for a video guide on how to do it.
     

  3. randall51286

    randall51286 New Member

    2
    0
    0
    Thanks stalkingbear I really do appreciate it. I don't know why I didn't check there first but I think that is a better option than trying to read an instruction manual. Once again thanks.

    Randall
     
  4. 7.62 Man

    7.62 Man New Member

    904
    0
    0
    Here are a few videos for the AK type FCG, the PSL will be about the same.;)

    [ame=http://www.youtube.com/user/BuildyourownAK#p/u/2/DqWGlLNlWo0]YouTube - BuildyourownAK's Channel[/ame]

    [ame=http://www.youtube.com/user/ltgrasshoppah#p/a/u/1/54ML_sMdagk]YouTube - ltgrasshoppah's Channel[/ame]

    [ame=http://www.youtube.com/watch?v=RpaOpAGUcc0&feature=fvw]YouTube - AK-47 trigger assembly and installation[/ame]
     
  5. progun3400

    progun3400 New Member

    18
    0
    0
    There are a few ways. I do it just like the fellow shows in the link below but as he mentioned in the video, if one of the ends of the hammer spring comes loose from behind the hammer, it could tear you up pretty good. After I hook the ends behind the hammer as he demostrates, I take a garbage bag tie wire and tie it around the hammer and spring ends to help prevent from getting bitten.

    [ame=http://www.youtube.com/user/BuildyourownAK#p/u/2/DqWGlLNlWo0]YouTube - BuildyourownAK's Channel[/ame]
     
  6. Gunfan--actic

    Gunfan--actic New Member

    35
    0
    0
    Great info guys, I,m installing the same trigger in my tricked out Romanian AK. Thanks x2