A2 stock fitment

Discussion in 'AR-15 Discussion' started by BWilder, Aug 24, 2014.

  1. BWilder

    BWilder New Member

    211
    0
    0
    I just picked up an A2 stock for my build but it has a slight gap between it and the lower. The screw is tightened all the way, I don't know if there's different size spacers available ? I don't think they're supposed to have that end plate right?
     

    Attached Files:

  2. SSGN_Doc

    SSGN_Doc Well-Known Member

    6,924
    51
    48
    Is the spacer that drops into the stock turned the right way so that it nests on the buffer tube properly? If it got flipped around it might leave a gap.
     

  3. BWilder

    BWilder New Member

    211
    0
    0
    The guy at the gun shop said it was a stag kit. It was used but for $35 I didn't even think twice
     

    Attached Files:

  4. JonM

    JonM Moderator

    20,110
    15
    38
    check inside the stock for anything the previous owner may have stuffed in there to allow room for a m4 style end plate. there maybe a washer or something in the stock itself.
     
  5. BWilder

    BWilder New Member

    211
    0
    0
    I ordered the a2 sling adapter from brownells and it fixed the problem. There wasn't anything inside the stock so I guess it was just cut a little to short,
     

    Attached Files: