a couple noob mistakes...

Discussion in 'Ammunition & Reloading' started by therewolf, Apr 10, 2011.

  1. therewolf

    therewolf New Member

    8,409
    1
    0
    One- Don't trust any one scale, if you're lucky you'll only wind up

    wasting a few hours with a bullet puller. Otherwise, it's a blown up

    gun and possible eye and hand injury.

    Two-When you put cartridges in the shaker for cleaning, be sure you

    only clean cartridges which won't nest inside each other, otherwise(as with

    say .45 and 9mm together) you wind up with a dozen or so bullets

    jammed tight with media.
     
  2. FirstSergeant

    FirstSergeant New Member

    58
    0
    0
    Good advice. Good idea to check scale calibration with weights before use.

    Yep, those little boogers like to hide out in one another, good call to closely inspect for that and other defetcs before processing.