181 series mini-14 scope mounts

Discussion in 'Gunsmithing Forum' started by patt323, Feb 18, 2013.

  1. patt323

    patt323 New Member

    1
    0
    0
    new so don't kill me to bad, looking\ at removing rear peapsight have a metal block sized to fit in it's place. Have a screw fitting on top for piccanny rail. Have the front clip that the (wood) hand hold clips to barrel set with possibley a form of zurt fitting to screw the other end of rail to. Anyone ever do this or attenpt this.
     
  2. JTJ

    JTJ Well-Known Member Supporter

    9,543
    145
    63
    You might want to look at an Amega rail and forward mount a pistol or ler scope. You have to remove the scope to remove the bolt for cleaning if it is mounted over the receiver.
     

    Attached Files:


  3. Txhillbilly

    Txhillbilly Active Member

    4,435
    28
    38
    Leupold used to make a scope mount for the early series Mini 14's. I had one on my 180 series.
    You will need to get the receiver drilled and tapped for it to mount.