11 mm rings ?

Discussion in 'Optics & Mounts' started by kiabe1, Aug 13, 2013.

  1. kiabe1

    kiabe1 New Member

    587
    0
    0
    Do they make a set of standard size scope rings designed to fit on an 11 mm rail. Designed to be used on a high powered rifle without rattling apart like a set of airgun rings will. If so what brand and where can i buy them. Thx
     
  2. kiabe1

    kiabe1 New Member

    587
    0
    0
    Heres the rail thats on there

    ForumRunner_20130813_194803.jpg
     

  3. JTJ

    JTJ Well-Known Member Supporter

    9,558
    165
    63
    CZ, B Square precision air gun rings. Mostly listed as rimfire by most mfg. Spring air guns are brutal on scopes and rings and good rings are essential. A lot of them are cheap ($9.95) and dont hold up. Mostly cheap screws. Warne's rimfire will cost about $30 and are listed for 11mm.
     
  4. kiabe1

    kiabe1 New Member

    587
    0
    0
    Will these stand up to repeated shots from a .30 calibur round
     
  5. JTJ

    JTJ Well-Known Member Supporter

    9,558
    165
    63
    I used the CZ rings on a 223 with no problems. Air gun rings have an additional vertical screw that locks against the action to prevent slippage. Quality air gun rings should hold up. I have seen them used with pistol scopes on Mosin's on the groove under the rear sight. If you go with the Warne rim fire rings you can get an anti slip clip to place against the ring to prevent slippage.
     
    Last edited: Aug 14, 2013