10 mm semi auto pistol

Discussion in 'General Handgun Discussion' started by formerCav, Jul 9, 2016.

  1. formerCav

    formerCav Active Member

    867
    100
    43
    who has one?
    what kind?
    can you shoot full house loads through it? (650 ft pds energy like an underwood round)?

    I know that Glock mod 20, 29, and Colt Delta Elite, EAA Tanfolio Witness,
    who else makes them?
     
  2. schnuffleupagus

    schnuffleupagus New Member

    489
    3
    0
    I have a G20. I've shot hot factory and hot hand loads through it.

    I've replaced a good bit of parts in 20 years. It is a key piece of my "bug in" kit.
     

  3. Hairtrigger

    Hairtrigger Member

    270
    0
    16
    I used to be hardcore 10mm
    I am down to a 610, Delta Elite, Double Eagle, G20, and a Springfield Linkless
    As well as Mech Tech units for the 1911. And G20
    I load below max loads, for me pushing limits seems pointless
    I do have a 6" Lone Wolf barrel on the Glock
    None of these see more than 500 - 1000 rounds a year
     
  4. partdeux

    partdeux Well-Known Member

    4,620
    142
    63
    P220 Limited Edition Guntalk Radio 20th Anniversary firearm.

    It is F*ing sweet. I LOVE LOVE LOVE shooting it. It's the BBQ gun that goes to the range maybe twice a year.
     
  5. JonM

    JonM Moderator

    20,110
    19
    38
    i have a delta elite and a coonan 357. 357 is more powerful if thats what your looking at. both are capable of shooting any loads in 357 or 10mm.

    the coonan i think is a better handling gun than the delta elite. more power better control
     
  6. danf_fl

    danf_fl Retired Supporter

    12,369
    57
    48
    I have a Dan Wesson C-BOB in 10mm.

    I shoot factory loads through it.
     
  7. robocop10mm

    robocop10mm Lifetime Supporting Member Lifetime Supporter

    11,380
    1
    0
    G20C, 1006, 1066. I have after market recoil springs/guides in the Smiths (Sprinco) and all will shoot the hottest stuff. For "normal" shooting, I shoot "normal" loads, 175 gr cast @1000 fps. Yes, I have a Lone Wolf barrel for the Glock
     
  8. big shrek

    big shrek Well-Known Member

    1,832
    44
    48
    Have a G20-SF w/ 9" Lone Wolf barrel for hunting...

    Need a S&W 10xx series pistol...
    Need a Star Megastar...

    Wish that SOMEONE would make a dedicated 10mm carbine,
    much like the Marlin Camp Carbines of yore...
    I'd sell my sister for something like that that wasn't on an AR platform ;)
     
  9. Mongo

    Mongo Well-Known Member Supporter

    1,560
    28
    48
    Dan Wesson Point man 10 mm Match. Stainless. (1911). I bought a .40 S&W barrel and slide spring from D W a few years back when 10 mm ammo was hard to find. I can change the barrel and spring then shoot .40 reliably. The .40 feeds perfectly off the 10 mm magazine. It is favorite semi auto.
    I had a G 20 for a few years no complaint but sold it. Now looking at the new 10 mm from Glock but waiting to see if they have any defect before buying one.
     
  10. big shrek

    big shrek Well-Known Member

    1,832
    44
    48
    Top of the line is the G40MOS...with the Reflex sight...
    Rented one...almost got me to trade in my G20Sf...almost...
    but I've got too much time in that one, know its habits perfectly...
    so the G40MOS is on my Xmas List now...for next year ;)
     
  11. JonM

    JonM Moderator

    20,110
    19
    38
    kriss is making a vector in pistol and carbine format.
     
  12. formerCav

    formerCav Active Member

    867
    100
    43
    I was just reading about a 460 Rowland kit to convert a 1911 45 pistol to the 460 round.
    How does that compare to the 10 mm?
     
  13. CaptMidnight

    CaptMidnight New Member Supporter

    4,537
    15
    0
    The .460 is a very impressive loading. I shoot the .460 loads in a Ruger BH .45 ACP cylinder.
     
  14. JonM

    JonM Moderator

    20,110
    19
    38
    460 is comparable to 44magnum. 10mm doesnt come close. 44mag edges 460 like 357mag edges 10mm.