10/22 Ruger into a M200 Cheytac Intervention (in progress)

Discussion in '.22 Rifle/Rimfire Discussion' started by defcon, Mar 4, 2012.

  1. defcon

    defcon New Member

    281
    0
    0
    OMG this thing is sooooooo bad ***!!!!

    I just picked up this full metall M200 Cheytac Intervention

    It retails for $650 but it cost me $300 for the shell used.

    I just finished gutting. I did some test fit and the Ruger 10/22 can fit inside however my dremel isn't good enough to cut out the thick metals. I need to go to my gunsmith and have him mill out the receiver and the barrel since its faster and more precise. I'm likely going to cut my trigger guard off my 10/22 and use an extended trigger so I can use the existing trigger guard of the M200.

    Also I'll be using a 29" barrel from urbanrifle.com. If it's too short, then I'll cut down the M200 barrel to match the length of the 10/22 barrel.

    This thing is extremely heavy. I'll weigh it tomorrow but it feels like its about 20lbs without optics.

    Right now its about 40% done. Hopefully the milling goes well when my gunsmith has time to work on it.

    [​IMG]
    _MG_9999 by defconskylude, on Flickr

    [​IMG]
    _MG_9997 by defconskylude, on Flickr

    [​IMG]
    _MG_9996 by defconskylude, on Flickr

    [​IMG]
    _MG_9994 by defconskylude, on Flickr

    [​IMG]
    _MG_9992 by defconskylude, on Flickr

    [​IMG]
    _MG_9987 by defconskylude, on Flickr

    [​IMG]
    _MG_9986 by defconskylude, on Flickr

    [​IMG]
    _MG_9979 by defconskylude, on Flickr
     
    Last edited: Mar 4, 2012
  2. hardluk1

    hardluk1 Active Member

    2,879
    5
    38
    Not a real cheytec right? Then WHy!! rather have it returned to useable condition. Is the barrel junk? If not you need what a bolt and trigger group.
     

  3. defcon

    defcon New Member

    281
    0
    0
    Its a metal airsoft shell. Nothing is broken. Its in mint condition. I want a .22 version of he cheytac
     
  4. pontiac163

    pontiac163 New Member

    103
    0
    0
    Thats going to be an awesome .22 when its done.
     
  5. defcon

    defcon New Member

    281
    0
    0
    a quick update.

    i grinded out majority of the metal internals using a heavy duty angle grinder. my dremel wasnt doing it due to the thin cutting disks.

    also ive decided to put a .22 bolt action into this chassis. i purchased a Marlin XT-22 and a Savage MKII F.

    XT-22 is getting picked up this Sunday so i get to finally drop it in for test fitment.

    Savage MK II is on special order and should arrive in 2-3 weeks.
     
  6. primer1

    primer1 Well-Known Member Supporter

    9,792
    280
    83
    A 20 lb .22? I hope your man enough for the fierce recoil. Sounds like a fun project, keep us updated.
     
  7. defcon

    defcon New Member

    281
    0
    0
    hehe its just a range toy. :p
     
  8. deerkiller03

    deerkiller03 New Member

    15
    0
    0
    well i would like to see some more pictures of it if you can, like recent updates on it
     
  9. defcon

    defcon New Member

    281
    0
    0
    sure. i just bought a second M200 Intervention. ill take pics of both when it arrives this week.