Firearms Talk banner

3D Printable Pocket Pistols

7K views 77 replies 18 participants last post by  Parlour-Printer 
#1 · (Edited)
I've been designing and printing parlour pistols recently, and sharing my designs as I go. With the right materials I'm sure they could be made to work with .22s as well, but primarily they're made for Percussion Caps. I give the designs away freely, but frankly I'm poor and running out of materials.
So yes, this is me schilling, but I promise I'm not looking for an easy payday, I'll be designing things anyway, I have a compulsion to design things. If I don't design things I start to get an itch in the back of my brain, I eat too much sugar and consume an absurd quantity of pornography.
But getting some money for my work would be nice, and would allow me to keep improving, and eventually I'd like to work on directed energy devices.
If you'd like to try my designs out, they're all up freely on my Patreon Page, and if you don't know how to make a percussion cap nipple, or you don't have a lathe (like me) I have instructional videos on Youtube. Links to Follow.
Attached photos are of my 'Mosquito' design.
Thanks for reading this far, I look forward to comments and criticisms.
:revolver:

https://www.patreon.com/jontheinventor
https://www.youtube.com/user/jono3952
 

Attachments

See less See more
5
#77 ·
I've attempted to add a locking system and safety to the lever-action slider, and decided that the existing model is just too small for it.
I'm not abandoning the concept, but I definitely need to start it from the ground up.
Meantime I've fleshed out an idea I had off to the side for a while.
https://www.patreon.com/posts/11618908
 

Attachments

#78 · (Edited)

After a long absence, due to a collection of obstacles, I have returned!
And I'm returning, now that I can actually continue my work, with a greatly superior design.
I present to you the Mosquito 3 'M' v.4
This is the first printable, functional, working prototype in the Mosquito 3 'M' lineup.
It's designed around a percussion cap firing mono-barrel, but the action could easily be scaled up and modified to fire a .22LR, or conceivably any standard cartridge.
But I wouldn't try printing anything to fire something larger than .22LR, you'd have to mill it out of metal.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top