Gift Premium Subscription To Wilder

Join Date:


Last Activity:

05-20-2013 2:49 PM

8 Likes on 8 Posts 


  • Colorado
  • Gunsmith, security guard


  • Posted in thread: Sig P226 9mm on 10-12-2012 at 06:04 PM
    Had mine for a couple years, had one failure to eject the first trip to the range with it. No
    other issues or failures. I'll bet someone did a "trigger job" on it and went too light on the
    hammer spri...

  • Posted in thread: Tikka on 08-28-2012 at 06:25 PM
    Glad it worked, thanks for the update.

  • Posted in thread: Tikka on 08-21-2012 at 06:34 PM
    The tikka box mag is generally pretty hard to seat all the way in. Yours is probably a little
    too tight and not getting fully latched. Try loosening the action screws a little bit (don't
    shoot it with...

  • Posted in thread: M1A trouble, lots on 08-09-2012 at 07:00 PM
    I have seen an m1a accidentally bump fire before. Basically the recoil pushes the gun back from
    your finger just enough for the trigger to reset, then when the gun comes forward off the
    recoil it push...

  • Posted in thread: Wolf Ammo on 08-08-2012 at 01:45 PM
    The hard primers are due to materials used to make the primer cups. Has nothing to so with
    berdan, or boxer. The places that use berdan ammo generally use it for military ammo, and use
    the harder prim...

  • Posted in thread: M1A trouble, lots on 08-08-2012 at 01:21 AM
    Pull the trigger group out, holding your thumb against the hammer to catch it when you pull the
    trigger. Pull the trigger releasing the hammer. Keep the trigger to the rear, and push the
    hammer back d...

  • Posted in thread: Handgun mounted flashlight vs freehead flashlight. on 08-06-2012 at 01:40 AM
    I use a gun mounted flashlight, I turn lights on as I clear my house, and call out to the
    people who should be there. I have also dealt with the adrenaline, and have a great deal of
    training. I'm not ...

  • Posted in thread: Anyone ever look into the safety of tritium sights? on 08-02-2012 at 06:38 PM
    A lot of manufacturers press in front sights with 200+ lbs. of force. A hammer and punch will
    not move them. We use an old WWII milling machine as a sight press.First rule of hand loads, is
    never shoo...

  • Posted in thread: Anyone ever look into the safety of tritium sights? on 08-01-2012 at 04:22 AM
    Gh0zt36, Tritium has a half-life of only 12.5 years. That means in 25 years it is completely
    dead.Not exactly, half-life means the amount of time it takes for half of a mass of radioactive
    material to...

  • Posted in thread: Anyone ever look into the safety of tritium sights? on 07-31-2012 at 01:37 AM
    The sights have a tiny bit of tritium in a glass capsule, in a plastic capsule, pressed in to a
    metal sight. In the unlikely event the capsules break there is too small an amount to do you
    any harm. Y...

Scheme well, scheme often. Please add "In My not so Humble Opinion" to the end of all my posts. Thank you.