W. C. Quantrill
Last Activity:08-16-2013 12:25 AM
Likes Given: 17
36 Likes on 33 Posts
Posted in thread: .30-06 die converted to .30-30 - is there a way? on 08-16-2013 at 05:01 AM
For sure. Go to FSReloading dot com and rifle dies and the RGB dies....$19 everyday and $14
when you catch them on sale. Its a 2 die set without all the frilly dillys and they work good.
Posted in thread: Ball stuck in barrel.... on 01-22-2013 at 03:55 AM
They have flushed all the powder out of the barrel with water so far. I will phone her and tell
her to JB a sacrificial puller in there. That would probably work.
Posted in thread: Ball stuck in barrel.... on 01-22-2013 at 03:53 AM
They tore the center out of the ball with whatever it was that they had. Now I'm wondering if
they can plug that hole with a larger brass screw and then push it out with a grease
Posted in thread: Ball stuck in barrel.... on 01-22-2013 at 03:03 AM
A friend of mine got an inexpensive flinter for her daughter, and the daughter short charged
it, and stuck the ball half way up the barrel. They used a cheap ball puller, and poked a hole
thru the mid...
Posted in thread: Revolver Pictures on 12-09-2012 at 07:42 PM
Thanks for the tip, but I avoid auctions at all costs. By the time you drive and wait and then
have to competitively bid against someone else, and then the gold diggers charge you an
additional 15% bu...
Posted in thread: .45acp for hogs and cougars on 12-07-2012 at 05:48 PM
If you are going to go with the hot and heavy loads, then get an appropriate rated spring to
absorb that recoil. You might want to go 18 or 19 pounds. I would just take the scope off the
rifle and use...
Posted in thread: How to smooth out a barrel? on 12-07-2012 at 01:59 PM
So your barrel is open on both ends? Take it down to someone that has a bead blaster, and blow
beads through it for a couple minutes, that will remove all the crud and polish the inside
slick. I do th...
Posted in thread: Varget pretty clean powded on 12-07-2012 at 12:52 AM
VARGETŪ The first of Hodgdon's revolutionary Extreme Extruded Powders, VARGET features small
extruded grains for uniform metering, insensitivity to hot/cold temperatures and higher energy
Posted in thread: Varget pretty clean powded on 12-07-2012 at 12:30 AM
I run 4350 in my .30 cals,,,I get real good performance and not as much felt recoil for some
reason. I just loaded a bunch of .308's with Varget, however many it takes to use up a pound of
powder. I l...
Posted in thread: Revolver Pictures on 12-07-2012 at 12:24 AM
a Smith Model 25-5. The 5 refers to .45 Colt. This one likes either the 270 gr Keith's or for
social carry, the 225 gr Leverevolutions. Whether hunting or social carry, this piece has