- Posts 13
Last Activity:10-25-2011 5:38 PM
Posted in thread: New to Glock with some Q's on 10-25-2011 at 10:29 PM
Yeah it's normal, at least with recent production Glocks. The recent production Glocks have
even looser tolerances than older production in some cases.
Posted in thread: Barrel Question on 10-25-2011 at 10:22 PM
The outside diameter of Glock .40 and .357SIG barrels are exactly the same. All Glock did when
they made their .357SIG models was to re-chamber the existing .40 barrels, add a little more
metal to the...
Posted in thread: Gun Cleaning Input on 10-05-2011 at 12:01 AM
With my Glocks, I clean once a month in the humid warm season, once every three months in the
arid cool season if I don't carry them. If I do carry them I field strip clean once a week. I
field strip ...
Posted in thread: Trigger Without Safety Tab? on 09-30-2011 at 01:54 PM
The trigger safety also acts as a drop safety, if the gun is dropped on the rear the trigger
safety keeps the trigger bar from moving rearward.
Posted in thread: New Glock owner with lots of questions.... on 09-28-2011 at 10:46 PM
Glock doesn't make an extended slide stop for the G36. Glockmeister makes one, it's a modified
Glock slide stop, modified to fit the G36. Most people say it works great but a few people have
said it d...
Posted in thread: Glock Gen. 4 Why so troubled? on 09-27-2011 at 10:22 PM
Gen4 Why So Troubled?It's not just Gen4. Gen3's have the same problem, though it doesn't seem
as bad in Gen3 for whatever reason.My 2004 Gen3 G23 ejects fine, my 2009 Gen3 G27 does not,
using the same...
Posted in thread: Add weight to barrel? on 05-11-2011 at 01:42 AM
The Jentra WeightI have no idea what it's made out of and I've never used one.
Posted in thread: Who Likes Glock's Finger Grooves? on 04-16-2011 at 11:54 AM
They fit my hands fine but I wouldn't mind seeing Glocks without finger grooves. I know many
people whose hands don't fit the finger grooves.
Posted in thread: question on 04-16-2011 at 11:52 AM
I use Hoppe's #9 bore solvent for the bore of the barrel. I make sure to be in a well
ventilated area when using the stuff, the fumes aren't good for you. I use Hoppe's Elite
Cleaner to clean everythi...
Posted in thread: GLock 19 trigger question? on 04-09-2011 at 02:17 PM
To get close to 3lbs you'd probably need a 3.5 connector which actually brings the trigger to
about 4.5lbs. Then a 6lbs trigger spring. It's a heavier than stock spring but that spring
resets the trig...