- Posts 1018
Last Activity:06-23-2016 8:11 PM
227 Likes on 170 Posts
Posted in thread: Gagging A Remington 11-87 Or 1100 Action on 06-13-2016 at 01:47 PM
A (one) rather large flat rubber band around the receiver of the 1100 or the 11-87 will keep it
from slinging the empties and hitting others on a trap line. You will have to experiment with
Posted in thread: Broken Remington 870 part on 05-27-2016 at 08:36 PM
A properly made MIM part is as good as a machined one, the problem is the manufacturing process
must be very tightly controlled, and you can't do a non destructive test on all those little
parts to ma...
Posted in thread: Remington 870 thoughts on 05-06-2016 at 11:56 AM
870s less dependable? What a crock. Some Mossberg or Remington guy always has to try to pull a
one upper. The 500 and the 870 have both established a fantastic track record over more than a
half a cen...
Posted in thread: Remington 870 thoughts on 05-04-2016 at 09:11 AM
I have never seen Remington Expresses priced that much more than a Mossberg. I have owned a
couple but could not grow to love the matte finish on metal or wood. I do much prefer the feel
of the steel ...
Posted in thread: Turkey chokes on 04-18-2016 at 07:19 AM
A catchy name will not do anything extra but cost you money.
Posted in thread: Mossberg 500 half bead removal on 04-11-2016 at 06:43 AM
Put some tape on the rib so you don't scratch it. A small 6 point socket would be best, next
best would be a box end wrench, and yes they do make them.
Posted in thread: Realoding powder on 03-23-2016 at 09:05 AM
Winchester Universals are probably THE absolute worst choice I can imagine for reloading.
Posted in thread: Mossberg 500 muzzleloader barrel!? on 03-21-2016 at 06:10 PM
My short foray into the world of black powder, and more so into black powder substitutes, was
ended by the necessity of the clean up. Taking apart single action revolvers is not difficult,
but I am ve...
Posted in thread: What Wrong wit my '97 on 03-18-2016 at 11:34 PM
I was going to ask that question.
Posted in thread: What Wrong wit my '97 on 03-18-2016 at 01:18 PM
To add a thought- when a gun (or most anything mechanical) is not working, there are a few
common reasons why-1. Dirt, foreign matter, etc interfering with operation2. Part that is
broken, loose, worn...