USMarineEJP

LATEST ACTIVITY

• Posted in thread: 5.56 Question??? on 02-17-2012 at 01:38 AM
  Yes you can run 55gr bullets through a 1:7 twist barrel, but.. My question is will that wear
  out your barrel faster? I'm wondering if the little bit of extra velocity's too much for the
  twist to handl...

• Posted in thread: 5.56 Question??? on 02-16-2012 at 03:29 AM
  5.56 with a 62 grain round and a 1/7 twist is accurate up to 550 meter point target.. A 1/9
  twist will cut that down to 400 meters because of stabilization issues.

• Posted in thread: Stag arms on 02-16-2012 at 03:19 AM
  The truth, if your looking to shoot 200-400 yards you are perfectly fine with a AR-15, and you
  want to got with a 1/7 twist to shoot a heavier grain round. A 16 inch barrel will be fine. The
  true spec...

• Posted in thread: STAG or Spikes Tactical you choose and Y??? on 02-08-2012 at 08:07 PM
  Links r at the top, I did the research just wondering if any1 had experience, and what their
  opinion would be.

• Posted in thread: STAG or Spikes Tactical you choose and Y??? on 02-08-2012 at 04:12 PM
  I would say , compare models 1 and 2 with the upgrade kit from Stag Arms. And the last two 16
  LE carbines on the last page from Spikes.

• Posted in thread: STAG or Spikes Tactical you choose and Y??? on 02-08-2012 at 02:20 PM
  There is a lot more to it than that. IMO each have a different target audience thus offer a
  different product.As far as the machining I'm not sure how accurate your comment is. They
  probably wouldn't ...

• Posted in thread: STAG or Spikes Tactical you choose and Y??? on 02-08-2012 at 04:01 AM
  Which AR do you think is better and why? If you wanna reference another AR then don't post.
  Only interested in who know these companies. Thank Youwww.stagarms.comwww.spikestactical.com

• Posted in thread: DPMS AR or Del-Ton AR on 02-02-2012 at 01:32 AM
  Ahhhhh kinda true with some things we buy but not all. Mil spec in out m16 means that they must
  meet or exceed our standards and our standard are higher when it comes to weaponry. What they
  look for i...

• Posted in thread: Need some help on Acog on 02-01-2012 at 02:58 PM
  I'm 5ft 5in, and my ACOG was set at T4 if I'm not mistaken. That was with an M16A4 full
  butstock. It also helped relieve scope shadow. It was very comfortable for me. I usually rest
  my nose at the end...

• Posted in thread: Need some help on Acog on 02-01-2012 at 06:04 AM
  Here is my range Zero and qual with limited time to shot and no adjustments from the 200 all
  the way to the 500 yrd with the ACOG