TheHateCamel

LATEST ACTIVITY

• Posted in thread: DPMS LR308 Upgrade Problems on 10-12-2012 at 02:32 AM
  Have you checked the compatibility of your upgrade parts with the LR-308? There are differences
  not only between the Armalite and DPMS patterns but between manufacturers. almost positive all
  the part...

• Posted in thread: DPMS LR308 Upgrade Problems on 10-12-2012 at 02:31 AM
  Close. Take it to 30. Back off a turn, then take it to the next opening, not exceeding 80#.Duly
  noted!

• Posted in thread: DPMS LR308 Upgrade Problems on 10-12-2012 at 02:30 AM
  Is the delta ring in the right position relative to the compression spring, snap ring and
  barrel nut? If something is wedged in between and keeping the barrel nut from tightening
  against the face of t...

• Posted in thread: DPMS LR308 Upgrade Problems on 10-12-2012 at 02:29 AM
  any reason why you went from the 1 piece free float to a 2 piece? :confused:I don't think
  torquing down the castle nut anymore will help, more likely to cause problems/damage :odoes the
  new 2pc rail f...

• Posted in thread: DPMS LR308 Upgrade Problems on 10-11-2012 at 08:31 PM
  Can you toss the end cap that is just behind the gas block? :confused:Unfortunately, no I can't
  :( This is one of the two things helping to hold this two-piece forend together...

• Posted in thread: DPMS LR308 Upgrade Problems on 10-11-2012 at 08:12 PM
  First time home gunsmithing project and first time poster. Bear with me and please have
  patience...I bought an LR308 about 2 years ago, and have been making modifications here and
  there since then. Mo...