Gift Premium Subscription To stumpy

Join Date:


Last Activity:

06-21-2007 2:43 PM


  • Posted in thread: Used Gunsite CCO on 06-17-2007 at 10:56 PM
    Recently bought a used Colt Gunsite CCO, I have another from new, and was dissapoited to find
    out when shipped that it had been modified, it has an upgraded hammer and different thumb
    safety from the ...

  • Posted in thread: Commander Recoil Spring on 06-13-2007 at 12:21 AM
    Wilson recommends either their #12 for a Light Target Load or a #20 for a Standard Load for the
    stock Commander. I installed the #20 and there is quite a noticable difference in performance
    at the ran...

  • Posted in thread: Guide Rod? on 06-12-2007 at 11:59 PM
    The guide rod helped me on my Colt Gunsite CCO, I was in my first 500 rounds with the gun and
    was not feeding the 7th round much of the time, I installed a Wilson guide rod (one piece), and
    the 7th ro...

  • Posted in thread: Arched Mag Well and Recoil Buffer on 06-12-2007 at 11:48 PM
    I use a recoil buffer, but keep a close eye on its status, I hear they can come apart and jam
    your piece, and if you need it in a situation I guess your in trouble, I think Wilson
    recommends to replac...

  • Posted in thread: Wilson Combat on 06-12-2007 at 11:41 PM
    I'm sure Wilson Combat makes there own slides and frames from there factory in Arkansas.

  • Posted in thread: Commander Question on 06-11-2007 at 01:25 PM
    I just clean the ramp on my alloy frame till it shines again, you say, stay away from
    polishing, what is considered polishing using a Dremel or something? Thanks

  • Posted in thread: Aluminum Frame? on 06-11-2007 at 01:47 AM
    Yea, I have a Colt Gunsite CCO, steel slide, aluminum frame, and I shot some +P 45 stuff
    through it, thankfully it was only approx 12 rounds, I was concernted about the wear on the
    frame, Try calling ...