- Posts 23
Last Activity:05-13-2013 9:47 PM
7 Likes on 7 Posts
Posted in thread: Recoil spring for my "G22 9mm"? :) on 03-19-2013 at 11:57 PM
Wouldn't have changed the spring unless I'd had the problem. Changed the spring and problem
solved. May have had a crappy spring to begin with. Lemons are out there. And I did buy 2 extra
rods and spr...
Posted in thread: Recoil spring for my "G22 9mm"? :) on 03-06-2013 at 11:39 PM
It's a gen 3 I bought new last July. Tried a gen 4 my friend has and I liked the 3 better. I
ditched the stock rod and spring after the first 100 rounds for a steal rod and aftermarket
ismi spring. Wh...
Posted in thread: Recoil spring for my "G22 9mm"? :) on 03-03-2013 at 11:21 PM
Definitely seems to be the case. My spring was a sponge. From now on I'll just change it every
1300 to be safe and sound
Posted in thread: Recoil spring for my "G22 9mm"? :) on 03-02-2013 at 06:17 PM
Since we're on the subject of recoil springs, how often are you guys changing them out? I got
1600 rounds out of mine before my g22 started failure to feed problems and kicking spent brass
Posted in thread: Recoil spring for my "G22 9mm"? :) on 03-01-2013 at 11:14 PM
My experience is with a gen 3 g22. The spring is 17 pounds for both a 9mm g17 and 40 g22. So
for a gen 4 your results may obviously vary
Posted in thread: Recoil spring for my "G22 9mm"? :) on 03-01-2013 at 07:46 AM
No, you don't need a different spring. For any non ported barrel, which you have, the stock
spring will work just fine. Regardless of any conversions. This is from my own experience
Posted in thread: 18" Hatsan Magnum Barrel Wanted on 02-25-2013 at 10:06 AM
And by the way, take down procedure is in reverse to instalation. May need a pair of pliers to
get the cap off though. I think the heat build up during shooting must make the cap self
tighten. The tak...
Posted in thread: 18" Hatsan Magnum Barrel Wanted on 02-25-2013 at 01:18 AM
Ok kibbleking, I'll do my best to explain the process in the easiest way I can so here's how it
goes. 1st order yourself a Remington 870 +2 extention kit with tube, cap, clamp and spring (all
Posted in thread: 18" Hatsan Magnum Barrel Wanted on 02-24-2013 at 02:23 AM
Hey kib. I'm going to take a few more pictures for you tomorrow in detail and the process isn't
as complicated as it seems. Stand by for more info on this tomorrow as I will walk you through
it step b...
Posted in thread: Serpa CQC on 02-24-2013 at 02:19 AM
I've had a level 2 serpa since the day I bought my g22 last summer and after trying several
other holsters from various brands and styles it's the only one I use anymore. There's
absolutely nothing wr...