Last Activity:03-08-2014 10:53 AM
24 Likes on 17 Posts
Posted in thread: 12 year old shooting G19, Shotgun, and AR15 on 03-08-2014 at 03:52 PM
I think its admirable parents are taking the time to teach a child (or children) about firearms
and firearms safety. But what makes this example any more special than any other responsible
Posted in thread: barrel length- chamber or no chamber? on 02-27-2014 at 06:43 PM
pony- while it does act as a propellant, the maker classes it as an explosive- the first
ingredient in many smokeless powders is nitroglycerine.Here is the Material Safety data Sheet
for Bullseye powd...
Posted in thread: barrel length- chamber or no chamber? on 02-27-2014 at 05:51 PM
You wanted chapter and verse? You should have asked- here ya go- addition, the test is made
with the action cocked so that the firing pin does not protrude from the bolt face. The dowel
will be close...
Posted in thread: Why is Austin spaming my PM? on 02-25-2014 at 12:34 PM
"promoting" = administration approved spam.
Posted in thread: 125gr .357 on 01-14-2014 at 01:48 AM
Gas cutting is increased dramatically when firing jacketed rounds in a fouled barrel. All lead
should be removed from the barrel before shooting jacketed magnum rounds. The lead build up in
Posted in thread: Remington 700 Help Question on 01-13-2014 at 08:49 PM
After you've assured yourself the base screws tighten normally, don't forget to use a drop of
blue loctite. (dont use red or you'll never get the screws out) so they dont loosen over time.
Posted in thread: starting to reload 40 S&W on 01-04-2014 at 10:52 PM
i dont load for 40sw but i load a LOT of straightwall cases in 9mm 45acp 45colt 44mag. the
technique is the same for all of em. for taper crimping:size a case then take your calipers and
measure the o...
Posted in thread: why does my local range? on 09-16-2013 at 12:56 PM
I'd hazard a guess that to get the most accurate information about why they want ID, is go
directly to the source. Actually ask the range why this is necessary!On another note, if they
are recording t...
Posted in thread: Remington 1100 cycling issues on 08-29-2013 at 12:48 PM
First tell us about your ammo. Factory or reloads and if reloads, load information.You mention
a complete cleaning, did that include cleaning the gas ports in the barrel sleeve that slides
over the ma...
Posted in thread: Can you mail ammo ? on 08-21-2013 at 01:18 PM
USPS regs prohibit sending live ammunition, primers and/or powder. Brass and projectiles can be
mailed however.Handguns are also prohibited by USPS, and to ship any of the above is a