VIEW MY

sfguy

Gift Premium Subscription To sfguy

Join Date:

07-09-2009

Last Activity:

02-24-2014 8:32 PM

LATEST ACTIVITY

  • Posted in thread: New little rifle. Winchester Trapper on 02-25-2014 at 01:32 AM
    That's the first I've heard you cant shoot lead through micro grooving man I been doing it
    wrong all these years. Could you may be thinking of glock?Any other insight on that cuz I've
    been doing it uh...

  • Posted in thread: New little rifle. Winchester Trapper on 02-24-2014 at 07:17 PM
    I have a Marlin 1894 that I bought in the 80s and still have. I always wanted a 357 rifle and
    this one fits the bill nicely. Can't shoot lead bullets in it though because of the micro
    groove rifling. ...

  • Posted in thread: Luger Mainspring on 03-20-2010 at 12:58 PM
    Thanks, I finally got the spring in and the Luger running. I think part of my problem was
    someone had put an overly long spring in it. I took off 3 coils and the pistol did not improve,
    so I decided t...

  • Posted in thread: Luger still fails to feed on 03-17-2010 at 04:44 PM
    Well I finally got the Luger shooting. Someone had taken a real nice matching number 1916
    Erfurt and put a 30 Kal. Luger barrel on it,and it was jamming every shot. Changed magazines,
    no improvement, ...

  • Posted in thread: Luger still fails to feed on 03-15-2010 at 03:24 PM
    A friends Luger that I am trying to fix is still giving me problems. Some one in the past re
    barreled a 1916 Erfurt to 30 kal Luger. Of course I don't know what else was done to it.It
    cycles and feeds...

  • Posted in thread: Luger on 03-10-2010 at 07:31 PM
    I have worked for 2 hours and cannot seem to get the mainspring back in. Do any of you have any
    idea on how this is done? Also someone mentioned to me that a 1916 Erfurt was not made in 30
    Cal Luger d...

  • Posted in thread: Luger Mainspring on 03-10-2010 at 06:57 PM
    I have been working for 2 hours trying to get a Luger recoil spring back in, there has to be a
    trick to it, any of you guys up to the task?sfguy

  • Posted in thread: Luger on 03-10-2010 at 02:50 AM
    One of the main problems with the Luger pistols is the ammo. Modern factory 9mm ammo is not
    loaded to the higher pressures that the Luger requires for proper functioning. The original 9mm
    Parabelum am...

  • Posted in thread: Luger on 03-05-2010 at 05:42 PM
    It's a timing issue, or the extractor. If the extractor has the proper holding pressure and the
    magazine is eliminated as the problem, it must be timing.Re-spring the gun to factory specs and
    go from ...

  • Posted in thread: Luger on 03-05-2010 at 01:03 AM
    Thanks for the tips, I looked at the ejector and not having another one to compare it with and
    not having worked on many Lugers, I don't know what I should be looking for, if the ejector is
    the proble...

0 COMMENTS
POST A COMMENT