SEHunter

LATEST ACTIVITY

• Posted in thread: Break-in a rifle on 11-12-2012 at 08:36 PM
  Have to say that i really didnt pay attention. My first patch looks every bit as black as
  before i did the break in but it cleans up with maybe two or three less patched when its all
  said and done. Im...

• Posted in thread: Bedding H-S Precision stock recoil lug area on 11-07-2012 at 12:08 PM
  ok, i appreciate all the information and advice.

• Posted in thread: Bedding H-S Precision stock recoil lug area on 11-07-2012 at 01:58 AM
  Edit... assuming that i have torqued the receiver before the bedding cures^^

• Posted in thread: Bedding H-S Precision stock recoil lug area on 11-07-2012 at 01:57 AM
  What happens if the lug were to not be taped and only release agent applied? I keep reading
  about the need for firm contact between the entire action to the stock bedding so why does this
  not apply to...

• Posted in thread: Break-in a rifle on 11-06-2012 at 10:10 PM
  Well, i just did the 1 shot-clean for 25 rounds followed up by two sets of 3 shots-clean,
  followed up by a 5 shots-clean and finally a 10 shots-clean. I cant tell any difference in my
  cleaning pads be...

• Posted in thread: Bedding H-S Precision stock recoil lug area on 11-06-2012 at 10:04 PM
  I am aware of his stock axxe55 but thanks for the reminder.Here was my experience, just the
  other day. I ordered a Bell and Carlson Medalist for my Weatherby MKV and it's advertised to be
  a drop in. I...

• Posted in thread: Bedding H-S Precision stock recoil lug area on 11-06-2012 at 09:52 PM
  i may be wrong, but i think the other posters might have been thinking you have a regular
  stock. if that stock has an aluminum bedding block, i doubt glass bedding the action is going
  to be needed. ac...

• Posted in thread: Bedding H-S Precision stock recoil lug area on 11-06-2012 at 02:32 AM
  Thanks- those videos are helpful. With an H-S stock that has the aluminum bedding block, would
  you say its necessary to carve out any of the area behind the lug, as is recommended with wood
  stocks?

• Posted in thread: $$$ Remington 700 trigger guards?? on 11-06-2012 at 02:27 AM
  thanks for your wisdom

• Posted in thread: Bedding H-S Precision stock recoil lug area on 11-05-2012 at 09:38 PM
  Jim1611- i dont think the video came through. One question i have is does the gun need to be
  positioned with the muzzle straight up when the filler is applied? From what i am
  understanding, its on the...