Last Activity:03-11-2013 5:10 PM
1 Likes on 1 Posts
Posted in thread: TWS DogLeg Rail review; My AK mount solution on 03-04-2013 at 09:49 AM
I bought my WASR-10/63 when I was like 19 and over the time Iíve owned it, it has become my
primary go to personal defense rifle. Slowly but surely Iím widdling things down to my specific
needs and wa...
Posted in thread: P-08 Luger questions on 03-04-2013 at 08:52 AM
Thanks for the replies guys. Iíve been busy so I havenít been able to post much until now.Well
I bought the gun for half of what it was going for on Gunbroker at the time I bought it. I wont
Posted in thread: Cylinder Honing on 03-04-2013 at 08:44 AM
I know this is an old thread, but I found the solution to my problem on this gun. Unfortunately
for me, I have terrible luck and found another problem.Well I used Flex-hone and managed to get
Posted in thread: does your AK's like 154 grain sp 7.62x39? on 03-04-2013 at 08:31 AM
My WASR-10/63 doesnt mind them. I'm going to hopefully get around to accuracy tests between the
Herter's brand 154 grain SP vs Hornady 123 grain SST steel cassed stuff and TulAmmo 123 grain
Posted in thread: Dragonov on 03-04-2013 at 08:24 AM
Most PSL's are essentially AK-47's on steroids with reinforcing plates at the end of the
receiver to keep from cracking during receiver bend under recoil of the 7.62x54 Rimmed
cartridge. While the PSL...
Posted in thread: P-08 Luger questions on 09-21-2012 at 06:45 AM
I recently bought a Luger P-08. Now dont get too excited because its not from WW2 from what I
understand. Its a Mitchell Arms P-08. The side of it has the roll mark (On the top half)
Mitchell Arms Ame...
Posted in thread: Simple Question on 06-23-2012 at 02:34 AM
Thanks for clearning that up QuentinI'm still reading and trying to make up my mind, the links
and info are greatly appreciated guys.
Posted in thread: Simple Question on 06-21-2012 at 03:54 AM
I don't understand that first statement, why buy assembled then replace parts when you can get
it right in the first place. Check DS specs. Commercial diameter receiver extension? Crap LPK?
You don't ...
Posted in thread: Simple Question on 06-17-2012 at 06:17 AM
okdonk- I am doing AR research, just wanting input from actual AR owners about some of this
stuff. I want to make the right decision on a lower and go from there. I'd much rather it be
Posted in thread: Simple Question on 06-17-2012 at 05:59 AM
The MOE Carbine stock.The receiver is marked "Multi" caliber like I like them to be but thats
hardly worth the extra $100. My problem is that pre-assembled lowers that I like are all out of
stock for ...