Last Activity:06-13-2016 10:36 PM
1 Likes on 1 Posts
Posted in thread: CBC head stamp 9mm brass on 03-23-2016 at 12:26 PM
Never had a problem with CBC 9mm. Once in a blue moon it resizes hard, but it shoot well in the
Posted in thread: 1911 recoil buffer: yes, no, maybe so? on 04-21-2015 at 05:47 PM
Thanks, but the gun had only had about 600rds through it for break in. (STI Trojan).
Posted in thread: 1911 recoil buffer: yes, no, maybe so? on 04-21-2015 at 11:55 AM
I tried them and after 200 or so rds it was toast.Never again.
Posted in thread: Lee pro 1000 help on 02-19-2015 at 11:03 AM
When you install a HeliCoil, after tapping, add red Locktite to the outside of the coil and
then install. Wipe off all excess Locktite and let sit for a day or two for curing. Re install
Posted in thread: trigger lock for 870 w/ pistol grip on 03-13-2014 at 10:35 AM
I use these, and they work with my Choate PG stock.
Posted in thread: Unconventional Shotgun Cleaning Method on 08-30-2009 at 02:10 PM
I've been using Tampax Super's for about 5 years now.I got the tip from one of the hunting
Posted in thread: .338 Lapua Mag vs .338-378 Weatherby on 03-23-2009 at 12:59 AM
In this country I don't think it is. I say that based on ammo availability. I have yet to see a
box of .338 Lapua ammo anywhere, while .338-378 Weatherby is available at most any well stocked
Posted in thread: .308 Win. Load Discussion on 03-23-2009 at 12:46 AM
308 Win. -- Working up loads for a Rem. 700P (Police), Leupold Mark 4, 6.5 - 20x 50mm LR/T
optics. I'm running once fired Federal Match brass, trimmed to 2.005" Deburred, polished
Posted in thread: Reloading Remington Gun Club Hulls on 02-22-2009 at 02:55 PM
On the Remington website they make comments in the questions section indicating that Gun Club
hulls have different reloading characteristics than the STS hulls. I know they're considered to
have a sho...
Posted in thread: Rem 870 Sticky Extraction on 02-22-2009 at 02:44 PM
What ammo were you using?Cheap Wally World?If so, try real ammo before stripping, unless the
gun is dirty.The steel bases or alloy bases do not spring back as much as brass bases,
therefore the steel/...