Last Activity:11-12-2014 3:49 PM
4 Likes on 4 Posts
Posted in thread: any expieience with 10mm? on 10-28-2014 at 11:49 PM
That would be a Breech lock in the world of Lee presses. I would look at an additional
aftermarket barrel for the Glock. Shooting cast lead makes it very cheap, one thing you can't
do with a stock glo...
Posted in thread: any expieience with 10mm? on 10-28-2014 at 09:32 AM
on the Dillon 550 there is a tool head that the dies screw into which offers a quick change
setup when going from caliber to caliber. I have purchased a set of dies for each pistol
caliber as a matter...
Posted in thread: any expieience with 10mm? on 10-27-2014 at 11:20 PM
bought the G20 gen4 today. stripped/cleaned/lightly lubed this afternoon. tomorrow weather
permiting, 100 downrange. range report to follow. damn that factory ammo is expensive. I see
another set of d...
Posted in thread: any expieience with 10mm? on 10-26-2014 at 04:19 PM
I am still leaning toward a Glock, either the Gen 4 20 or perhaps a G29. it seems the 29 will
diminish the effectiveness of the round somewhere around 50 to 70 FPS. I am thinking that
should still be ...
Posted in thread: any expieience with 10mm? on 10-17-2014 at 08:12 PM
thanks to all for the opinions and for sharing your experience. I own quite a few striker fired
pistols and am fond of them but have yet to own a Glock. they seem to be among the few with a
Posted in thread: any expieience with 10mm? on 10-16-2014 at 10:01 PM
I will likely purchase a full size Glock in 10mm after first of the year. any feedback? it will
be carried in bear country as an alternative to a 44 mag revolver. I am more comfortable with
semi auto ...
Posted in thread: SR9 issue on 09-13-2014 at 03:46 AM
the only time I have ever had failure to feed was when I neglected to clean my practice
magazines. they got pretty gunky. as far as failure to fire, never an issue. I pulled the mag
disconnect out whe...
Posted in thread: Xds on 07-14-2014 at 11:29 PM
I had some that were slightly out of battery when mine was new. so close but no cigar. gave me
a very weak primer hit, not enough to detonate. the first thought was mal function due to
striker. when I...
Posted in thread: My XDs bubble has burst on 12-14-2013 at 09:10 PM
mine requires a very stout grip to function reliably, much more firm than any other of my
semi-autos. it also required a feed ramp polish and a light polish in the chamber. one more
requirement was ar...
Posted in thread: XDS issue poll on 11-30-2013 at 02:20 PM
same grip that is firm enough for all my other semi-autos is not firm enough for the XDS. need
to choke the snot out of this lil' girl. never been accused of being a limp wrister but this