VIEW MY

red ryder

Gift Premium Subscription To red ryder

Join Date:

11-08-2009

Last Activity:

03-07-2015 12:35 PM

LATEST ACTIVITY

  • Posted in thread: BCG hung up on forward assist on 03-07-2015 at 12:55 PM
    Submit at least 10 characters.

  • Posted in thread: BCG hung up on forward assist on 03-07-2015 at 12:54 PM
    Submit at least 10 characters

  • Posted in thread: BCG hung up on forward assist on 03-07-2015 at 12:53 PM
    No barricade shooting, spring was in place. Standing slow fire at a target.

  • Posted in thread: BCG hung up on forward assist on 03-07-2015 at 12:00 AM
    Brand new 300 blackout upper, including bcg and bolt.After shooting about 10 rounds the bolt
    locked back in the open position and would only wiggle just a bit. Got the upper and lower
    separated and sa...

  • Posted in thread: Duracoat advice on 02-19-2015 at 12:19 AM
    They are a pretty tight fit. I'll plan on assembling prior to spraying it

  • Posted in thread: Duracoat advice on 02-18-2015 at 07:00 PM
    I have a Stevens model 75 pump that I am working on refinishing. It has some pretty rusty areas
    and the bolt was stuck open (broken firing pin). I plan on using durafil and "durablue" from
    duracoat to...

  • Posted in thread: Ruger 10/22 cycling issue. on 01-05-2015 at 03:12 AM
    Maybe I wasn't being clear. Where the bottom right edge of the bolt rides along the receiver
    there was a burr in the receiver that the bolt was catching on. I could stick my pinky inside
    the ejection ...

  • Posted in thread: Ruger 10/22 cycling issue. on 01-05-2015 at 01:29 AM
    So I found two problems.First there was a nasty burr inside the receiver just forward of the
    ejection port. I filed and buffed it smooth and the bolt slides right up to the barrel face
    without interfe...

  • Posted in thread: Ruger 10/22 cycling issue. on 01-04-2015 at 04:20 AM
    Seems odd to me that it runs with the tac sol barrel and ruger bolt but not with the Kidd bolt.
    I'm going to polish the inside of the receiver next and see if that helps.

  • Posted in thread: Ruger 10/22 cycling issue. on 01-04-2015 at 02:00 AM
    Parts:New receiverTactical solutions sbx barrelKidd bolt and charging handle/springKidd buffer
    pin, trigger pins, vblock Volq. TriggerHogue stockAmmo:CCI mini magsAmerican Eagle
    SupressorOnce I put it...

0 COMMENTS
POST A COMMENT