Last Activity:05-31-2012 6:30 PM
Posted in thread: Headspace Problems? on 05-31-2012 at 10:03 PM
Im sorry, I know I am asking a lot of questions. Rem 700 police, 338 Lapua. When I chamber a
round i have to slide the bolt fast and then I am able to push the the bolt down. However if I
chamber a ro...
Posted in thread: M1A Op Rod on 05-29-2012 at 01:56 AM
How much play is there supposed to be in the op rod/charging handle? It seems that in mine
there is a little bit of wiggle and I am able to move it around slightly. Is this a big
deal/problem? I feel ...
Posted in thread: What is this noise? on 05-28-2012 at 07:11 PM
I dont know how I noticed this but on my m1a when the bolt is held open I can hear something
sliding slightly back and forth when I tilt the gun foward then backwards. Does anyone know
what is moving ...
Posted in thread: M1a Question on 01-29-2012 at 08:29 PM
Thanks for the help guys, one more question. i know your suppost to let the bolt slam and not
let it ride slowly. Could any damge be caused if dry firjng and bolt isnt all the why closed. i
know it wa...
Posted in thread: Off Center Firing Pin on 08-20-2011 at 08:39 PM
Is this a big deal? Out of a ruger m77 hawkeye in 300 win mag. It goes bang every time but it
is noticable how the the firing pin is not striking in the center of primer. Here is a picture
Posted in thread: Stiff bolt question? on 01-10-2011 at 12:56 AM
Is it a big deal? is there anything I can do to it?
Posted in thread: Stiff bolt question? on 01-10-2011 at 12:24 AM
I have a ruger hawkeye in 300 win mag and right after I shoot it is very hard to work the bolt
back. It is NOT hard to lift the bolt up which indicate pressure problems, so I am confused on
what can c...
Posted in thread: Some play in forearm? on 09-06-2010 at 01:49 AM
yes the forearm is pretty thin compared to others. The flex is hard to describe...it deffenetly
does not move as much as you think when you feel it. (no more than 1/16 of an inch id say, but
Posted in thread: Some play in forearm? on 09-06-2010 at 01:05 AM
I dont think its the barrel cause i can push on the end of the forearm and can see the gap
tighten so the barrel touches the stock and when i let go the forearm springs back. Its a very
Posted in thread: Some play in forearm? on 09-05-2010 at 10:28 PM
I have a ruger hawkeye m77 in wood stock standard, which is factory free floated. Is it normal
when you put some pressure on the forearm for it to move slightly. I tried adjusting the action