Gift Premium Subscription To nulreference

Join Date:


Last Activity:

03-30-2014 9:44 PM

2 Likes on 2 Posts 


  • Posted in thread: winnie Model 94 angle eject on 03-28-2014 at 11:41 PM
    sounds to me like you didn't measure at all and bashed it with a hammer to make it fit...
    perhaps the error belongs to the installer?and many/most gun parts are slightly oversize so
    they can be cut/gr...

  • Posted in thread: Cheap Gun Safe Lights on 03-13-2014 at 10:45 PM
    a 6 sided metal box will dampen a emp but not nessisaraly block it a fariaday cage must be
    grounded to earth to be totaly effective

  • Posted in thread: New stock for Vanguard on 02-28-2014 at 07:10 PM
    richards from everything ive seen does a good inlet and a semi finished outside expect lots of
    sanding / shapingi know they call them drop ins and for the action it is but i could inlet a
    4x6 and make...

  • Posted in thread: Ruger P90 on 02-14-2014 at 02:27 PM
    have him take a picture of his extractor and ejector

  • Posted in thread: Browning x-bolt magazine question on 02-14-2014 at 05:54 AM
    as long as its secure and it feeds good it should be ok but how much wiggle we talking 1/16th?

  • Posted in thread: Ruger P90 on 02-12-2014 at 12:06 AM
    swap magazines with him see if the result is the same could be as simple as that

  • Posted in thread: A Word of Warning on 01-29-2014 at 03:16 PM
    well wait now you traded the p-38 for work to be done and it was never finished properly? id
    say get a lawyer might just be able to get the p-38 back and maybe some on the side so you can
    get the kimb...

  • Posted in thread: I want to build a rifle, need advice on 01-22-2014 at 10:29 PM
    7x57 Ballistic performanceBullet weight/type Velocity Energy9.0 g (139 gr) RWS KS 900 m/s
    (3,000 ft/s) 3,240 J (2,390 ft·lbf)280 rem.Ballistic performanceBullet weight/type Velocity
    Energy120 gr (8 g)...

  • Posted in thread: I want to build a rifle, need advice on 01-20-2014 at 03:22 AM
    280? almost might as well go for the 7x57 Mauser not a whole lot different from what I have

  • Posted in thread: I want to build a rifle, need advice on 01-19-2014 at 08:51 PM
    id say 35 whelen for my 2 cents