MUG

LATEST ACTIVITY

• Posted in thread: DIY M6 Scout on 11-23-2012 at 07:00 PM
  I'll post some additional close up pics. soon.

• Posted in thread: DIY M6 Scout on 11-23-2012 at 05:27 PM
  You should make one of these can honestly say I've never heard of the M4. I chose the M6
  design because I know someone that owns one and I always liked the functionality. Living less
  than tem miles f...

• Posted in thread: DIY M6 Scout on 11-23-2012 at 05:18 PM
  Initial tests were using Winchester 2 1/2 inch 1/2 oz. #9 shot target load at approximately 15
  yards. Pretty even pattern against a 12" target. I was playing it safe when first fired in case
  something...

• Posted in thread: DIY M6 Scout on 11-23-2012 at 05:01 PM
  Thanks. My next build is going to be a single shot break barrel .410 handgun. Similar in
  function to the Cobray/Leinad derringer but with the look of a modern semi-auto handgun.
  Another poor mans judg...

• Posted in thread: DIY M6 Scout on 11-22-2012 at 03:17 PM
  It's all steel. Made out of 16 ga. It's hollow with slot and tabbed ribs. Plug welded and
  ground. Like the Springfield M6, it has on board ammo storage in the stock. 11 .410 rounds. It
  is a little hea...

• Posted in thread: DIY M6 Scout on 11-21-2012 at 02:31 PM
  Both barrels are .410. I didn't have a way to broach a barrel effectively for a .22 caliber.
  This was my first attempt at a complete build and I didn't want to take a lot of time trying to
  get a .22 b...

• Posted in thread: DIY M6 Scout on 11-21-2012 at 01:40 PM
  The fab work didn't cost me anything but time. I'm a steel fabricator by trade and have access
  to all the necessary equipment and material. I would guess that I probably have about $150
  total for both...

• Posted in thread: DIY M6 Scout on 11-21-2012 at 12:25 PM
  That's correct. The only purchased items were the hardware. Pins, screws, springs etc.
  Everything else was fabricated.

• Posted in thread: DIY M6 Scout on 11-20-2012 at 11:14 PM
  Thanks brother.

• Posted in thread: DIY M6 Scout on 11-20-2012 at 10:26 PM
  Complete ground up build of a .410 O/U based on the Springfield Armory M6 Scout. Slightly
  longer and more stout than the original. Test fired without incident. Still have some finishing
  touches to com...