Kestral

LATEST ACTIVITY

• Posted in thread: FN 130 32acp on 10/16/2011 at 8:03AM
  Have been trying to get a pic of an FN 130 32acp pistol,fitted with an adjustable rear sight & spur
  magazine.It looks like a 1922,and have been told it could be a model 110 or a 115 or even a 1971 whi...

• Posted in thread: Hand Reamer on 06/11/2011 at 5:47PM
  Aquired 800 Norma as new 9mm Browning Long berdan cases,5mm diam primer pocket.Purchased 5000 RWS large
  pistol berdan primers also 5mm,,and found that they are a fraction to tight to seat.Would anyone...

• Posted in thread: Webley 455 mk6 on 04/06/2011 at 4:07PM
  If anyone has a Webley Mk6 in 455,or similar, I managed to acquire some 45 Long Colt cases converted to
  455 rev,from Buffalo Arms, Not being able to find a 455/265 grn hollow base mould .I necked the ...

• Posted in thread: Freedom of Speech "Censorship" on 04/06/2011 at 3:35PM
  If they ( The ones above ) really wanted to,they could stop most of the problems by making it impossible
  for incomers to bring their own rules & regulations with them. If they want to settle in a new ...

• Posted in thread: 357 Mag 110gr XTP loading issue on 10/25/2010 at 10:28AM
  Just started on a mixed bag of 38 s/w reloads,the cases are Norma.Kynock, Dominion & Gevolet. They all
  reloaded very well except for the Gevolet,they all had very pronounced bulges about a third of th...

• Posted in thread: 357 Mag 110gr XTP loading issue on 10/11/2010 at 10:54AM
  Forgot to mention it with the above reply,I use with very satisfying results the Lee Carbide Factory
  Crimp Die. It gets rid of the bulges and crimps the bullet as well to the correct overall amount.

• Posted in thread: 357 Mag 110gr XTP loading issue on 10/11/2010 at 10:48AM
  Ive had this happen to me on odd occassions,some of the bullets were slightly oversize,as they fit so
  tight,its also ( possible ) that the trapped air cannot escape and bulges out.We would have to get...

• Posted in thread: 357 Mag 110gr XTP loading issue on 10/11/2010 at 10:28AM
  Have you checked that your bullets are all to the correct diameter

• Posted in thread: RCBS Balance Beam Scale on 08/29/2010 at 10:14AM
  My RCBS 10/10 scales have been in use for upto 20 years or so,so I emailed RCBS from the other side of
  the pond to ask them if they thought it was time to change the pivot points or not,( Its still sp...

• Posted in thread: B/P cartridges on 08/21/2010 at 6:36AM
  Thanks c3Shooter,will give the lighter smokeless a go before trying the B/P, your reply to our problem is
  most useful.