Last Activity:09-29-2016 10:24 AM
Likes Given: 34
59 Likes on 35 Posts
Posted in thread: Show your ride on 09-16-2016 at 03:52 PM
This ride is more fun
Posted in thread: Fertilizers on 08-30-2016 at 02:57 AM
Around here the common nitrogen fertilizer is urea (46-0-0) and is commonly available in bags
or bulk loads.
Posted in thread: AirBow on 07-05-2016 at 02:17 AM
Not that much more costly than a compound bow. Most mainline top end bows are $1,000 to
.....$1,800 for the bow alone. Add a top end sight for $400, and stabililzer for another
$200,and a $150 arrow r...
Posted in thread: Fitness on 07-02-2016 at 12:43 PM
You can exercise all you want, and you still get old. But if you don't exercise you don't get
to be as old. And with exercise, you feel better while getting old.
Posted in thread: Gps on 06-29-2016 at 04:18 PM
Except for very detailed information my phone works better than my Garmin GPS but only in
places where there is a good phone signal. Where there is no, or poor, phone signal the GPS is
the only thing ...
Posted in thread: P320, .45 acp on 06-02-2016 at 09:42 PM
No, I have not seen one either.AND I have the same questioin about the Kimber Micro 9. Where
Posted in thread: Judge says Sandy Hook Victims can Sue Gun Mfg on 04-16-2016 at 03:48 PM
Well, then, Budwweiser and Ford should be held responsible for drunk drivers too. Besides they
have a lot more money for the lawyers.
Posted in thread: Baby Sig on 02-29-2016 at 01:06 AM
...it breaks at nearly 10 pounds. That's just taking PC too far IMO.....Oh, that's a lot. Mine
was right at 7.5#.Unless you know what you want, SIG might fix it to spec for free if you
Posted in thread: Baby Sig on 02-28-2016 at 03:05 PM
I, too, at one time wanted to improve the trigger on my P938. But then I realized I used it for
a carry gun and the trigger was plenty good enough for that purpose. It did improve with use
and I proba...
Posted in thread: Baby Sig on 02-25-2016 at 08:29 PM
They had feed issues then I presume? A good ramp polish would probably be in order?Some did.
Also make sure the guide rod (two piece) remains tight. Re-torque your grip screws occasionally
for a while...