JonnyV

LATEST ACTIVITY

• Posted in thread: favoite alcohol to drink on 02-20-2013 at 11:43 PM
  I make something close to Founders Centennial IPA. It's my favorite...or Arrogant Bastard Ale

• Posted in thread: Ar15 quad rail??? on 02-20-2013 at 11:41 PM
  Got my Yankee Hill free float for a little over a $100 on eBay. Midwayusa also has them at
  decent prices...well, they did. Not too sure about now.

• Posted in thread: New to reloading, issues with .223 rounds on 01-19-2013 at 10:02 AM
  I still think you're collapsing the shoulder and trim length doesn't have anything at all to do
  with this problem.To see where the problem is take a round that had these problems and paint
  the whole t...

• Posted in thread: Bolt/Magazine problems on 01-14-2013 at 02:08 PM
  Alright, got a day off and decided to look into this issue. The suggestions about gas
  pressure/volume got me thinking. My DPMS bull barrel came with a gas block with a pic rail, it
  wouldn't fit under ...

• Posted in thread: Bolt/Magazine problems on 01-08-2013 at 08:19 PM
  Prolly an issue with the gas system not letting enough gas through to fully cycle the bolt or a
  too heavy recoil spring or buffer or combination of those.If it doesnt lock the bolt back with
  an empty ...

• Posted in thread: Bolt/Magazine problems on 01-08-2013 at 08:02 PM
  I've only had my freshly built AR to the range twice but each time I was having issues with
  rounds feeding into the chamber. Seems the bolt is just skimming over top the rounds. However,
  I can use the...

• Posted in thread: New to reloading, issues with .223 rounds on 01-04-2013 at 07:48 PM
  The cases I've been working with were fired out of my original AR. I just tried a few that were
  fired out of my current setup and I had no problems. Case length on all is between 1.751 and
  1.756". Inf...

• Posted in thread: New to reloading, issues with .223 rounds on 01-03-2013 at 01:26 AM
  Oh and I forgot to mention, I am using a full length sizing die.

• Posted in thread: New to reloading, issues with .223 rounds on 01-03-2013 at 01:25 AM
  Crimping the brass shouldn't matter. I rarely ever crimp my brass.Are full length or neck
  sizing your brass?Is the brass once fired,or from another gun? If so,You need to full length
  size all of your ...

• Posted in thread: New to reloading, issues with .223 rounds on 01-03-2013 at 12:43 AM
  I crimped some of the 55gr since they have the cannelure. The 60gr have no cannelure so I
  didn't crimp them. I am leaning toward the need to trim. A buddy at work has an extra trimmer
  he's going to le...