Last Activity:05-29-2015 12:09 PM
Likes Given: 78
59 Likes on 49 Posts
Posted in thread: washing Bore Snakes on 05-27-2015 at 01:57 PM
I use a bucket of soapy water and wash it by hand. Just make sure to rinse it off well
afterwards and hang it to dry. I have never had a problem doing this.
Posted in thread: Which would be my best first AK? on 01-07-2015 at 04:11 PM
Wasr Rifles work just fine. Back when Wasr rifles were first being imported they did have some
issues with a few rifles such as magazine wobble and canted sights. The new wasr rifles century
Posted in thread: Scope Help on 12-30-2014 at 02:45 AM
I got a chance to take it out to the range and it shot about a 5 inch group at 25 yards from a
standing position. Now that I know all the rounds are on paper I'm going to take it to a 100
yard range a...
Posted in thread: Scope Help on 12-26-2014 at 09:46 PM
Thank you all for the replies! I adjusted the scope and the problem seems to be gone. Once I
take it to the range I will post an update.
Posted in thread: Scope Help on 12-26-2014 at 03:16 PM
I will try to get a good picture. Should the view in the scope just be a black ring around the
outside of the scope picture?
Posted in thread: Scope Help on 12-26-2014 at 03:40 AM
Hello and Merry Christmas!I recently purchased a Savage Axis Rifle with a Bushnell scope. This
is essentially my first experience with a scope. I used a laser bore sight and have the scope
Posted in thread: New H&R Handi-rifle .243 Win. on 12-15-2014 at 01:38 AM
How do you like the fit/finish?
Posted in thread: Cleaning a marlin 60 from the muzzle or bore? on 12-10-2014 at 03:00 AM
Personally, I don't currently use a muzzle guide for my 22LR rifles. Mainly because I don't
need to clean them very often and because I am using a carbon fiber rod. The way I clean a
rifle is going to...
Posted in thread: Cleaning a marlin 60 from the muzzle or bore? on 12-09-2014 at 06:51 PM
Whether or not you damage the barrel from using an aluminum or brass rod is going to depend on
how often the firearm is cleaned and what precautions are taken during cleaning. I used to use
Posted in thread: New Forum Member from VA on 12-07-2014 at 04:30 PM
First off, I would like to Thank you for your service! Welcome to the forum, Lots of good
knowledgeable folks here.